THIS IS A GUIDE ONLY AND MUST BE READ IN CONJUNCTION WITH INSTRUCTION MANUAL
HEADLANDS/ TURNING • Always raise machine when on headlands and when turning. S P E E D T I L L E R S T A R T - U P T I P S Ⓡ DEPTH CONTROL • Full ground disturbance begins at 63.5mm (2.5”) depth. • Depth of cut controlled with Depth Control settings. See pg 29
TILT ADJUSTMENT (SETTING TO REDUCE SIDEWAYS TRACKING) • Start with front disc 20mm higher than back discs. • Follow instructions for tilt control settings and adjustment. pg 30 • Always start shallow then adjust down to required depth
FRONT LATERAL DISC POSITIONING IS FACTORY SET. See pg 33 for adjustment setting. WING DOWN PRESSURE • Both models to place wing fold circuit (green) in float mode • Apply wing down pressure only where soil is hard and dry (see page 28 for further information). SPEED RANGE • 8-15kph. (5-9mph) • Greater activity occurs at higher speeds.
ROAD TRAVEL SPEED LIMIT • 32kmh (20mph)
27
2995P2 & 2912P2
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker