When you receive the machine, make sure that it has not been damaged during transportation and that no parts are missing. Only by giving us immediate advice can the necessary replacement parts be obtained. Ensure that all components are correctly adjusted.
K-Line spareparts and accessories havebeen specificallydesigned anddeveloped for themachines produced. We would call your attention to the fact that non-genuine parts and accessories are not recommended by K-Line. The use of such replacement parts frees K-Line from all liability and makes the warranty void. The installation and/or use of non-genuine parts may, because of technical characteristics of construction, modify or influence the performance of the machine negatively.
IDENTIFYING THE MACHINE FOR REQUESTING SPARE PARTS
The machine is identified by the serial number on the metal plate on the machine. When requesting spare parts or maintenance service, please indicate the model and number of your equipment to ensure prompt and efficient attention.
10-14 Horsepower x width of machine in feet 25-35 Kilowatt x meter width of machine in meters Tractor weight must be same as or greater than the towed unit.
Standard : 1 x double spool With hydr roller OR hydr tilt adjust 2 x double spool With hydr roller AND hydr tilt adjust 3 x double spool
Hydraulic operating pressure
DEFINITIONS USED IN THIS MANUAL
DISC ARM IDENTIFICATION (REAR VIEW)
VIEW FROM REAR OF MACHINE
Top plate bolt tension Min: 75 ft-lb / 100 N-m Max: 100 ft-lb / 135 N-m BOLT TENSION
Disc bolt tension 250ft lbs /340nm
2945R RIGID TRAILING SPEEDTILLER
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker