1000 Series MOUNTING PROCEDURES
Before mounting of 1000 Series Spring Tine Harrows, machine should be correctly ballasted to compensate for weight of harrows. Ensure strength of machine is adequate to accommodate harrows.
□ Lower machine to be fitted to the ground on flat surface. □ Set harrows in correct sequence behind machine □ Attach mount arms to machine (U-bolts supplied). See Figure 1. □ Attach mount arms to 100 x 50 mm harrow H frame section (U-bolts supplied). See Figure 2. □ Tighten all bolts.
Figure 1
Mount arm U-bolts
Page 4 of 16
Made with FlippingBook - Online Brochure Maker