S A F E T Y
BEWARE OF CRUSHING HAZARD WHEN ENGAGING & DISENGAGING SAFETY LOCKS & IN THE OPERATION OF THE WING FOLDING MECHANISM
• Beware of pinch points in wing lift area when securing or releasing safety locks. • Never stand within radius of wings when in raised position, or folding and unfolding.
FAILURE TO COMPLY WILL RESULT IN SERIOUS INJURY OR DEATH.
TO UNFOLD MACHINE • Fully raise wheel-lift. • Lift wings just free of rest-saddle by operating tilt hydraulics. • Extend wing cylindersto fully open position. • Lower tilt cylinders to working position.
Figure 28
TO FOLD MACHINE • Fully raise with wheel lift
• Raise rear tilt up fully, then back off slightly. (Wings when folded should contact the rest-saddle at correct height before lowering into position.) • Fold wings into rest saddle. • Lower into position. • Secure safety locks or chains. DANGER: BEWARE OF UPTHRUST AND DOWN/THRUST ON DRAWBAR DURING OPERATION. Figure 30 • Tractor weight must be equal to machine weight. • Drawbar pin must be securely fastened with safety chains in place.
Figure 29
Figure 30
2912, 2962 & 2995P Speedt i l l er Power f l ex Ⓡ
Operator & Safet y Manua l
2 5
Made with FlippingBook - Online Brochure Maker