F I E L D O P E R AT I O N
RAM STOP COMBINATIONS
*NB - INCHES DISPLAYED DO NOT INDICATE DIGGING DEPTH
Figure 42
USEFUL HINTS 1. Machine digging too shallow on right hand side. • Lower right hand tractor linkage arm. 2. Cross working at 15 degrees off line gives better leveling and trash clearance. 3. Full ground disturbance starts at 63.5mm (2.5 inches). Adjustment should be made to compensate for disc wear and concavity. • To improve weed control and for better soil disturbance. • Adjust lateral disc positioning. • Ensure machine is traveling in line. • Increase depth to cut. • Replace discs.
BLOCKING IN EXCESSIVE TRASH • Lower rear discs gang to drive better in soil. • Adjust angle of lift soil deflector to allow greater flow.
• Try reducing speed slightly. CLOGGING IN WET SOILS 1. Raise working depth. 2. Raise front discs. 3. Give soil more time to dry out.
2912, 2962 & 2995P Speedt i l l er Power f l ex Ⓡ
Operator & Safet y Manua l
3 3
Made with FlippingBook - Online Brochure Maker