HH31 HH59 900 Series Hydraulic Harrow Bar Operator Manual

900 S E R I E S HYDRAUL I C HARROW BAR

OP E R ATOR & S A F E T Y I NS TRUC T I ON MANUA L

Models: • HH31 • HH37 • HH42 • HH48 • HH59

© K-Line Ag 2018 1023 W 9th St | PO Box 248 Grafton, ND 58237 USA 74 Young Rd | PO Box 340 Cowra, NSW 2794 AUS

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 1

29/07/2019 1:32:29 PM

Wou ld you l i ke a copy of th i s manual emai l ed to you?

Send your reques t to mar ket i ng@k- l i ne . net .au or scan here :

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 2

29/07/2019 1:32:29 PM

Dear Customer

Thank you for purchasing a 900 Series Hydraulic Harrow Bar made by K-Line Industries. We would like to assure you that you have made a good choice, and will be able to rely on this high quality piece of equipment. We ask you to follow the user’s instructions closely, as this will ensure that you experience the benefits of using the machine without experiencing the unnecessary down time caused by misuse. When you receive the machine, make sure that it has not been damaged during transportation and that no parts are missing. Contact your dealer immediately if any parts are missing. Ensure that all components are correctly adjusted. The return of the Warranty Registration Form Page 27 will enable a prompt and efficient identification of your Harrow Bar and attention to any concern you may have. Before operating PLEASE TAKE THE TIME TO LEARN the process of operation. Do not take the unit for granted; ease into becoming familiar with your new equipment. The operator should be a responsible adult familiar with farm machinery and trained for this purpose. Do NOT allow persons to operate or assemble the unit until they have read this manual and understand how to use this machine, and observe the safety precautions. Never exceed the limits of this machine. If its ability to do a job, or to do so safely, is in question - DO NOT TRY IT.

DO NOT attempt to operate this equipment under the influence of drugs or alcohol.

Remember - Your best assurance against accidents is a careful and responsible operator.

If you have any questions not answered in this manual or require additional copies or the manual is damaged, please contact your dealer or be free to phone us on our free call number:

USA - 1800 445 6882 AUS - 1800 194 131

The team here at K-Line Agriculture trust you enjoy a good season and prove the benefits of owning and operating a quality machine that is built to perform.

Signed:

James Larsen General Manager

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

3

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 3

29/07/2019 1:32:29 PM

TA B L E O F C O N T E N T S

Specifications Legal Disclaimer

5 5

INTRODUCTION

6 6 6

Identifying The Machine Tractor Requirements

Definitions Used In This Manual Availability Of Genuine Parts

6

6

RISK MANAGEMENT

7-9

Identifying Hazards

7 7 7 7 8 9

Monitor & Review Control Measures

Risk Assessment

Risk Control

Risk Assessment Score Chart

Risk Assessment Table

SAFETY

10-15

Safety Precautions Safety Alert Symbol

10-11

12 12

Signal Words

Instruction For Safe Operation

13

Tire Pressures & Safety Attaching To Machine

14 15

Hitching/Unhitching To Tractor

15

Assembly Diagram

16

DECALS

17-20

Decal Locations & Quantities Safety Decals & Stickers

17

18-20

Testimonial Permission Form

21-22

WARRANTY Warranty Letter

25-27

25 27

Warranty Registration Form

END OF DOCUMENT

32

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

4

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 4

29/07/2019 1:32:30 PM

H Y D R A U L I C H A R R OW B A R S P E C I F I C AT I O N S

MODEL

HH31

HH37

HH42

HH48

HH59

OPERATING WIDTH

9. 46M (31 ’ )

1 1 . 18M (37 ’ )

12 . 9M (42 ’ )

14. 6M (47 ’ 1 1 ” ) 18.06M (59 ’ )

TRANSPORT WIDTH (APPROX) HARROW SECTION CONFIGURATION

3 .0M

3 .0M

3 .0M

3 .0M

4. 7M

1 1 4-3-4

13 5-3-5

15 6-3-6

17 7-3-7

21 8-5-8

4 X ( 10. 75 X 15 . 3) 2 X ( 185 X 14) 2 X ( 18” X 3 1/2” ) 1 X ( 16” X 3” )

WHEEL EQUIPMENT 6 X ( 185 X 14) 6 X ( 185 X 14) 8 X ( 185 X 14) 8 X ( 185 X 14)

1 X ( 18” X 3” ) 1 X ( 16” X 2 1/2” )

1 X ( 18” X 3” ) 1 X ( 16” X 2 1/2” )

1 X ( 18” X 3” ) 1 X ( 16” X 2 1/2” )

1 X ( 18” X 3” ) 1 X ( 16” X 2 1/2” )

HYDRAULIC EQUIPMENT

JACK EQUIPMENT

1 X KH140 1 X KH140 1 X KH140 1 X KH140 1 X KH160

2 X ( 14 X 3950MM)

2 X ( 14 X 5720MM)

2 X ( 14 X 6600MM)

2 X ( 14 X 7610MM)

2 X ( 16 X 9100MM)

CABLE EQUIPMENT

MAINBEAM CONSTRUCTION (WING)

100MM SHS 100MM SHS 100MM SHS 100MM SHS 150MM SHS

A-FRAME CONSTRUCTION

125 X 75MM RHS

125 X 75MM RHS

125 X 75MM RHS

125 X 75MM RHS

150 X 100MM RHS

UNI - JOINTS BOLT SIZS - GRADE 8.8

1 1/4”

1 1/4”

1 1/4”

1 1 /4”

1 1/4”

Figure 1

LEGAL DISCLAIMER LAST UPDATED: 06/08/18

The information contained in the L-Line Industries Pty Ltd (also trading as “K-Line Ag” and “K-Line Agriculture”) manual is for general information purposes only. K-Line Industries Pty Ltd assumes no responsibility for errors or omissions in the contents on the book. In no event shall K-Line Industries Pty Ltd be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence with the use of the Service or the contents of the Service. K-Line Industries Pty Ltd reserves the right to make additions, deletions, or modification to the contents of this manual at any time without prior notice.

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

5

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 5

29/07/2019 1:32:30 PM

AFTER DELIVERY

When you receive the machine, make sure that it has not been damaged during transportation and that no parts are missing. Only by giving us immediate advice can the necessary replacement parts be obtained. Ensure that all components are correctly adjusted.

GENUINE PARTS

K-Line spareparts and accessories havebeen specificallydesigned anddeveloped for themachines produced. We would call your attention to the fact that non-genuine parts and accessories are not recommended by K-Line. The use of such replacement parts frees K-Line from all liability and makes the warranty void. The installation and/or use of non-genuine parts may, because of technical characteristics of construction, modify or influence the performance of the machine negatively.

IDENTIFYING THE MACHINE FOR REQUESTING SPARE PARTS

The machine is identified by the serial number on the metal plate on the machine. When requesting spare parts or maintenance service, please indicate the model and number of your equipment to ensure prompt and efficient attention.

TRACTOR REQUIREMENTS

10-14 Horsepower x width of machine in feet 25-35 Kilowatt x meter width of machine in meters Tractor weight must be same as or greater than the towed unit.

Hydraulic valves

4 x Double spool (optional) 2800 PSI approximately

Hydraulic operating pressure

DEFINITIONS USED IN THIS MANUAL

Figure 2

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

6

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 6

29/07/2019 1:32:30 PM

R I S K M A N A G E M E N T

Risk management is the process of finding out what may cause an injury, deciding what may happen as a result, and doing something about it.

The steps of risk management are: • Identify the hazards to workplace health and safety arising from work activities • Assess the risks

• Determine and implement control measures to reduce risk • Monitor and review the effectiveness of the control measures IDENTIFYING HAZARDS

Prior to commencing work, all hazards related to the work tasks should be identified. The selection of the appropriate work procedure(s) will depend on the type of work procedure(s) and hazards involved. Regular safety inspections will also identify hazards and ensure that control measures are in place. RISK ASSESSMENT Risk assessment allows appropriate control measures to be developed. Once hazards have been identified, they should be assessed in terms of their potential to do harm. To assess risk, consideration should be given to probability and consequences. (SEE RISK ASSESSMENT SCORE CHART - Pg 8). RISK CONTROL Risk control is the process of eliminating or reducing risk factors. Control measures should be chosen and implemented to eliminate or reduce risk as far as practicable. When deciding on the most appropriate measures to use, practicality and acceptance of the control measures should be considered. Safe Working Procedures will be developed for all high – medium risk hazards. MONITOR AND REVIEW CONTROL MEASURES The risk identification, assessment and control process requires regular monitoring to ensure the implemented control measures perform as originally intended and continue to prevent or adequately control the risk of injury or incident. Control measures should also be checked carefully to ensure that new hazards are not created, directly or indirectly, by the original control measures.

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

7

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 7

29/07/2019 1:32:30 PM

R I S K A S S E S S M E N T S C O R E C H A R T

Figure 5

AT ALL TIMES COMPLY WITH RECOMMENDATIONS AND REQUIREMENTS OF THE MANUFACTURER AND THE ENVIRONMENTAL PROTECTION AUTHORITY

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

8

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 8

29/07/2019 1:32:30 PM

R I S K A S S E S S M E N T - C O N T I N U E D

RISK SCORE

REVISED RISK SCORE

CODE

HAZARDS

CONTROL

ADJUSTING & CLEANING MUST ONLY BE DONE WHEN MACHINE IS LOWERED OR IN TRANSPORT POSITION AND ONLY AFTER ALL CHAINS AND BOLTS HAVE BEEN CHECKED FOR TIGHTNESS & WEAR IN THE LOWER POSITION. ENSURE JACK IS INSTALLED CORRECTLY & JACK RECEIVES REGULAR MAINTENANCE. KEEP FEET AND BODY CLEAR WHEN OPERATING. ENSURE NO PERSONNEL ARE BETWEEN TRACTOR & HARROW BAR WHEN HITCHING TRACTOR MACHINE MUST BE LOWERED INTO WORKING POSITION USING SUITABLE LIFTING EQUIPMENT BEFORE PRIMING IS EFFECTED BY SLIGHTLY LOOSENING FITTING/S INTO CYLINDERS AND OPERATING TRACTOR HYDRAULICS TO ACHIEVE FULL UNINTERRUPTED TRAVEL OF CYLINDER SEVERAL TIMES. THEN RE-TIGHTEN HYDRAULIC TINE FITTINGS ENSURE ALL THREE JACKS ARE CORRECTLY POSITIONED AND TAKING WEIGHT BEFORE REMOVING DRAWBAR PIN. STICKERS WARN OPERATOR MAINTAIN REGULAR CHECKS ON HYDRAULIC SYSTEM FOR WEAR & CHECK ALL FITTINGS ARE SECURE ENSURE TRACTOR OIL FLOW IS LIMITED TO REDUCE FALLING SPEED OR DO NOT INTERRUPT MACHINE FALLING UNTIL MACHINE IS FULLY IN LOWERED POSITION SAFETY PINS MUST BE PUT IN PLACE AS SOON AS MACHINE IS PUT IN TRANSPORT POSITION AND IF TRAVELLING ON PUBLIC ROADS TO DISCONNECT HYDRAULICS FROM TRACTOR

CRUSHING - WHEN ADJUSTING AND CLEANING, AS MACHINE MAY DROP WITHOUT WARNING

1

5

1(A).

CRUSHING - IMPROPER USE OF JACK

1

5

1(B).

CRUSHING - WHEN HITCHING TRACTOR

2

5

1(C).

CRUSHING - PRIOR TO PRIMING HYDRAULIC SYSTEM, AS MACHINE MAY DROP WITHOUT WARNING

1

5

1(D).

SUDDEN LIFT OF DRAWBAR CAUSING SEVERE INJURY, IF MACHINE BECOMES UNHITCHED PENETRATION OF OIL - BROKEN OR BADLY MAINTAINED HYDRAULIC LINES RUPTURE OF OIL LINES BY OVER PRESSURE WHEN MACHINE COMES TO SUDDEN STOP BEFORE FULLY LOWERED TO WORKING POSITION COLLISION - HYDRAULICS ACCIDENTALLY LOWERED WHEN MACHINE IS BEING OPERATED IN TRANSPORT

1

5

1(E).

2

5

2(A).

2

5

2(B).

1

5

3.

Figure 6

ALL HAZARDS & RISKS ARE CONTROLLED THROUGH SAFE WORKING PROCEDURES & ADEQUATE SIGNAGE

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

9

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 9

29/07/2019 1:32:30 PM

WARNING! ! ! SAFETY PRECAUTIONS

FAI LURE TO OBSERVE THE FOLLOWING INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH

It is the responsibility of the purchaser to:

• Maintain in as new condition all warning and safety signs and devices at all time.

• Consult electricity authorities and all relevent energy companies to determine safe working distances from overhead power lines etc BEFORE operation of the machine. POWER LINES CAN ARC AND ELECTROCUTE WITHOUT COMING IN CONTACT!!! • Ensure all operators are familiar with this manual and all safety devices and features of the machine. • Take every reasonable precaution as is commonly expected in this industry and in the operation of the machine. • Maintain the machine at all times in a condition that is safe to operate, and ensure strength and balance of machine is adequate to accommodate the K-Line products you have purchased. • Must conduct a risk assessment, taking all risks into consideration before comissioning machine for use.

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 0

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 10

29/07/2019 1:32:30 PM

It is the responsibility of the operators to: Read and understand your manual. Take time to familiarize yourself with the operation of this machine, particularly the safety signs and devices fitted to this machine.

USE OF MACHINE BEYOND ITS LIMITS OR INTENT OF OPERATION WILL VOID WARRANTY.

Slow down in terrain such as rocks, or other difficult operating conditions.

I MPORTANT NOT I C E

• Safe work procedure analysis must be performed before attempting to assemble this machine.

• Do not attempt to operate this equipment under the influence of Drugs & Alcohol. • K-Line Ag can not be held responsible for any injury, death or property damage in the process of assembling this machine.

For further information please contact :

US: 1800 445 6882 AU: 1800 194 131

• Ensure hydraulic system is full primed.

K-Line Ag has produced this manual as a guide for the operation of your machine. While every care and precaution has been taken in compiling this booklet, K-Line Ag carries no responsibility for errors and omissions. • This production is made available as is, without warranty of any kind expressed or implied. • K-Line Ag assumes no responsibility for damages resulting from the use of information contained herein. • This booklet is compiled to comply with the present state of the machine at the time of publication, and K-Line Ag reserves the right to improve and revise their products at any time.

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 1

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 11

29/07/2019 1:32:30 PM

S A F E T Y A L E R T ! ! S A F E T Y . . . Y O U C A N L I V E W I T H I T Y O U R S A F E T Y A N D T H E S A F E T Y O F O T H E R S I S I M P O R TA N T

• BE PREPARED! • BE SAFE! • BE AWARE! • BE SEEN!

When you see this symbol, you must be alert to the possibility of injury or death. SAFETY ALERT SYMBOL

SIGNAL WORDS

The use of signal words, DANGER , WARNING AND CAUTION relating to the safety messages. The appropriate signal word is selected when using the following guidelines.

Indicates an imminently hazardous situation that if not avoided, WILL result in serious injury or death if proper safety measures are not taken.

Indicates a potentially hazardous situation that, if not avoided COULD result in serious injury or death if proper safety measures are not taken .

Indicates potentially hazardous situation that, if not avoided MAY result in serious injury or death if proper safety measures are not taken.

ALL OPERATORS MUST UNDERSTAND AND ABIDE BY MAINTENANCE SAFETY PROCEDURES SET OUT IN THIS BOOK. IT IS THE RESPONSIBILITY OF THE ASSEMBLER TO ATTACH ALL SAFETY SIGNS AND DEVICES TO THIS MACHINE. FAILURE TO OBSERVE THE INSTRUCTIONS OF THIS BOOKLET COULD RESULT IN SERIOUS INJURY OR DEATH.

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 2

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 12

29/07/2019 1:32:30 PM

INSTRUCTIONS FOR SAFE OPERATION

The machine should not be driven, maintained or repaired by people who are not aware of the contents of this Risk Document. This User’s Manual should be read and understood by all those who use, adjust or control the machine. These safety instructions should be passed onto other users.

1. BE SURE tractor drawbar pin is locked securely in place. 2. Make SURE all personnel are clear of machine when folding/ unfolding & when in operation. 3. DO NOT operate unit while people are within 20 metres. 4. KEEP CLEAR of machine when in working & lifted position - AT ALL TIMES. 5. Hydraulic lines & hoses operate under extremely high pressure & if damaged or worn MUST be repaired IMMEDIATELY. 6. Keep HANDS & BODY CLEAR of any oil leakage as high pressure oil can penetrate the skin. 7. All bolts, nuts & pins MUST be well secured. 8. DO NOT stand on or ride on machine. 9. NEVER get under or on top of machine when it is supported by jack and KEEP LEFT & BODY CLEAR when operating jack. 10. NEVER alter the depth control or change to or from transport position, while another person adjusts safety pins. 11. This machine has not been designed or built for road use. Please consult State Police, Roads & Traffic Authority and ay other relevant authorities regarding the roads concerned when in transit. 12. DO NOT operate if any part of this machine is within 10 metres of overhead power lines. 13. SPEED LIMIT - Subject to permit regulations, local government Authorities, road surface conditions & prime mover towing recommendations. Maximum towing speed is 40km/hr. DO NOT EXCEED AT ANY TIME.

14. TIRE PRESSURE - Consult recommended tire pressure table. 15. Before operation, all hydraulic cylinders must be primed.

IMPORTANT K-LINE INDUSTRIES Spare parts and accessories have been specifically designed and developed for the machines produced. We call your attention to the fact that non genuine parts and accessories are not recommended by K-LINE INDUSTRIES. The use of such replacement parts frees K-LINE INDUSTRIES from all liability and makes the warranty void. The installation and/or use of non genuine parts may, because of the technical characteristics of construction, modify or influence the performance of the machine negatively.

REMEMBER AN IMPLEMENT WITH NO BRAKES REQUIRES CAUTION & COMPETENCE

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 3

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 13

29/07/2019 1:32:30 PM

T I R E S A F E T Y & P R E S S U R E S

SERVICING PROCEDURES

• Always cage tires before seating beads. • Never exceed stated pressures when seating beads. • Do not attempt to mount a tire unless you have the suitable equipment and experienced personnel. • Inflating tires can be dangerous. Always stand to the side when inflating. • Failure to comply could result in serious injury or death. • Load ratings of replacement tires should meet or exceed weight require- ments. • Correct pressure is 90PSI / 413KPA (Centre) 75PSI / 344KPA (Wing) • Before mounting wheel to machine, check all hub and rim contact surfaces are undamaged and free of paint, dirt and grease. • Lubricate wheel stubs with standard viscosity oil. • Tension wheel nuts to 350ft lbs / 474nm. • For field operation: Re-tension after first, fifth, then every fifty hours of op- eration. • For road travel re-tension first 3miles (5kms), 10miles (15kms), and thereafter at 25miles (40kms) intervals

- ALWAYS CAGE TIRES BEFORE SEATING BEADS. - NEVER EXCEED STATES PRESSURES WHEN SEATING BEADS. FAILURE TO COMPLY COULD RESULT IN SERIOUS INJURY OR DEATH

Figure 6

Figure 7

TIRE PRESSURE Centre: 90PSI / 413KPA Wing: 75PSI / 344KPA Wheel nut tension: 350ft lbs / 47nm

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 4

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 14

29/07/2019 1:32:30 PM

S A F E T Y

AT TA C H I N G T O M A C H I N E

N.B. keep body well clear when attaching tractor to machine at all times. follow all safety precautions set out on preceding pages

HITCHING TO TRACTOR

1. Adjust drawbar height to suit tractor using jack. 2. Back up machine 3. Place tractor in ‘park’ position 4. Secure drawbar pin in place wiht lynch pin 5. Attach safety chain to machine 6. Plug in hydraulic lines intor tractor remotes 7. Hoses are coded according to function. 8. Raise implement jacks & lock into position 9. Prime hydraulic system.

Figure 8

Figure 9

UNHITCHING

1. Stop tractor. Place in ‘park’ position. 2. Use implement jacks to raise machine slightly (En- sure jack is securely locked in position). 3. Unplug hydraulic hoses 4. Remove drawbar pin and safety chain 5. Tractor now ready to drive away.

DO NOT REMOVE DRAWBAR PIN UNTI L JACK IS CORRECTLY POSITIONED.

Figure 10

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 5

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 15

29/07/2019 1:32:31 PM

A S S E M B LY D I A G R A M

Figure 11

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 6

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 16

29/07/2019 1:32:31 PM

S A F E T Y D E C A L P L A C E M E N T

Figure 12

Decals part numbers & quantities shown in table below:

A C D G H J L M N R

DECAL

1 1 1 1 1 1 1 2 2 1

QTY

Figure 13

IMPORTANT If safety signs have been damaged, removed, become illegible or parts replaced without decals, new decals must be applied. New decals are available from your authorized dealer or direct from factory.

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 7

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 17

29/07/2019 1:32:31 PM

S A F E T Y D E C A L S

A. 9WD-W022

B. 9WD-C023

E. 9WD-D01V

G. 9WD-W021

C. 9WD-W05

D. 9WD-D04

H. 9WD-C04

F. 9WD-D01H

I. 9WD-I01

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 8

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 18

29/07/2019 1:32:31 PM

S A F E T Y D E C A L S - C O N T I N U E D

N. 9WD-W01

J. 9WDW-T5

0. 9WD-D01

K. 9WDD-T3

L. 9WD-W024

R. AUS Speed Sticker Max 32kph/20mph

T. Hydraulic colour

M. 9WD-W10

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

1 9

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 19

29/07/2019 1:32:32 PM

S A F E T Y D E C A L S - C O N T I N U E D

U. 9WD-I02

Y. Wheel Depth

W. Folding Instruction

Q. 9WD.F01

P. 9WD-R01

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 0

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 20

29/07/2019 1:32:34 PM

T E S T I MO N I A L P E R M I S S I O N F O R M

Name: Phone Numbers: Machine Type & Size:

I give permission for K-Line to publish my: (tick all that apply)

Testimonial Name Photo Audio Video

I give permission for K-Line to give interested clients my contact number to discuss my K-Line product

SIGNATURE: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ DATE: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

My Story:

More to say? Please turn over...

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 1

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 21

29/07/2019 1:32:34 PM

Thank you!

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 2

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 22

29/07/2019 1:32:34 PM

SEND US A TESTIMONIAL EXPLAINING WHY YOU LOVE YOUR K-LINE AG PRODUCT, AND WE WILL SEND A FREE HAT! Send to marketing@k-line.net.au or scan here :

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 3

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 23

29/07/2019 1:32:34 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 4

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 24

29/07/2019 1:32:34 PM

WA R R A N T Y

K-LINE AGRICULTURE has been known over the last 22 years for supplying an ever expanding range of quality agricultural machinery. K-LINE AGRICULTURE warrants the products it manufactures and distributes to be free of defective materials and workmanship for a period of twelve months from date of purchase, to the first owner. Any part of the goods manufactured and distributed by K-LINE AGRICULTURE that proves to be defective material, will be replaced or repaired by K-LINE AGRICULTURE when returned to K-LINE AGRICULTURE at cost to purchaser and at purchaser’s risk. Goods soldshall onlyhave thebenefit of thiswarranty if thepurchaser has compliedwith themanufacturer’s instructions in relation to the maintenance and operation of the said goods. All conditions and warranties implied by Law or Statute are hereby expressly excluded and negative so far as legally permissible. K-LINE AGRICULTURE is not otherwise liable for any direct, indirect or consequential loss or damage howsoever arising or occurring, whether founded in tort, contract, and statute or otherwise. This warranty must be read as subject to the General Terms and Conditions and does not cover misuse, neglect or negligence. ANY CLAIM FOR WARRANTY IS ALSO SUBJECT TO THE FOLLOWING CONDITIONS: • Machine has not been subject to misuse. • The speed limit of 20mph (32kmh) has been observed at all times. • The machine has not been used for custom or hire work. • Equipment must be handled, assembled, operated, maintained and stored correctly in accordance with the manufacturer’s instructions by competent personnel. • Warranty registration form must be signed by reseller and purchaser and returned to K-LINE AGRICULTURE within 14 days of invoice. Warranty is not valid unless registered. • Normal wear and tear, routine maintenance costs and accidental damage are NOT covered by this warranty. • Any alteration of equipment or negligence in maintenance including the use of non-genuine parts, renders this warranty null and void. • K-LINE AGRICULTURE will not authorize or reimburse expenses without a warranty request form filled out to K-LINE AGRICULTURE satisfaction.

Signed on behalf of K-LINE AGRICULTURE

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 5

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 25

29/07/2019 1:32:34 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 6

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 26

29/07/2019 1:32:35 PM

WA R R A N T Y R E G I S T R AT I O N F O R M

 Conduct comprehensive risk assessment of machine with consideration for use and maintenance

 Ensure machine is delivered as per purchase order including options

 All pins and lynch pins are in place

 Hydraulic system is primed and operating properly (if applicable).

 Check gear boxes for oil (if applicable).

 Check belts for tightness (if applicable).

 Instruction manual is supplied and explained.

It is the responsibility of the purchaser to: • Maintain in as new condition all warning and safety signs and devices at all times. • Ensure all operators are familiar with this manual and all safety devices and features of the machine. • Maintain the machine at all times in a condition that is safe to operate, and ensure it complies with any relevant safety acts of parliament, government authorities and regulations. • Take every reasonable precaution as is commonly expected in this industry and in the operation of the machine. • Before mounting, check with manufacturer of machine or consult engineer to ensure strength and balance of machine is adequate to accommodate the K-Line products you have purchased. • You must conduct a risk assessment, taking all risks into consideration before commissioning machine for use.

Reseller:

Client First Name: Client Last Name:

Salesman:

Trading Name:

Address:

Address:

Phone:

Phone:

Date of In- voice: Invoice No:

Email Address:

Start- Up Date:

Machine Make & Type:

Serial No:

Signed:

Signed:

To confirm registration for warranty, please return this page (signed) to F :( 02) 6342 6913 or E: sales@k-line.net.au

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 7

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 27

29/07/2019 1:32:35 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 8

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 28

29/07/2019 1:32:35 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

2 9

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 29

29/07/2019 1:32:35 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

3 0

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 30

29/07/2019 1:32:35 PM

THIS PAGE IS LEFT INTENTIONALLY BLANK

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

3 1

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 31

29/07/2019 1:32:35 PM

E N D O F D O C UM E N T

© K-Line Ag 2018 1023 W 9th St | PO Box 248 Grafton, ND 58237 USA 74 Young Rd | PO Box 340 Cowra, NSW 2794 AUS

900 Ser i es Hydrau l i c Har row Bar

Assemb l y Ins t ruc t i on Manua l

3 2

HH31 operator & safety INSTRUCTION MANUAL -05-04-18.indd 32

29/07/2019 1:32:35 PM

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32

www.k-line.net.au

Made with FlippingBook - Online Brochure Maker