K-Line Ag © ___________________________________________________________________
To Adjust Lateral disc gang position
Slide adjuster linkage
Loosen main retaining bolts on slide mechanism (See Figure 30) Turn slide adjusting linkage to adjust to right or left (see figure 30) Lock slide adjusting linkage and tighten main retaining bolts (380ft lb / 500nm)
Side Coulter Adjustment
Height adjustment setting
Fore & Aft adjustment
Series of holes are provided for height adjustment – (see Figure 31-A)
Adjust coulter on left hand side of module for optimum furrow filling.
For excessive trash conditions Move coulter forward and angle outwards Raise coulter. Move coulter to the outside of supporting angle for more clearance.
Hydraulic wing cylinders must be fully extended for all models and remote lever operated in float mode .
Models with floating wing slots (see Figure 31-B) fully extend hydraulic cylinders,
Models without floating wing slots must be operated in float position at all times.
Floating wing slot system model
Page | 19
Made with FlippingBook - Online Brochure Maker