Multiflex Speedtiller Operator Safety Manual

K-Line Ag © ___________________________________________________________________

To Adjust Lateral disc gang position

Slide adjuster linkage

 Loosen main retaining bolts on slide mechanism (See Figure 30)  Turn slide adjusting linkage to adjust to right or left (see figure 30)  Lock slide adjusting linkage and tighten main retaining bolts (380ft lb / 500nm)


Slide Bolts


Figure 30

Side Coulter Adjustment

Height adjustment setting

Fore & Aft adjustment

Series of holes are provided for height adjustment – (see Figure 31-A)

Adjust coulter on left hand side of module for optimum furrow filling.

For excessive trash conditions  Move coulter forward and angle outwards  Raise coulter.  Move coulter to the outside of supporting angle for more clearance.

Angle adjustment

Figure 31-A

Hydraulic wing cylinders must be fully extended for all models and remote lever operated in float mode .

 Models with floating wing slots (see Figure 31-B) fully extend hydraulic cylinders,

 Models without floating wing slots must be operated in float position at all times.

Floating wing slot system model

Page | 19

Made with FlippingBook - Online Brochure Maker