K-Line Ag © ___________________________________________________________________
First Start-up
Figure 31-B
Comments
Pg
Before starting
Set machine on level surface
Fully extend wing rams for machines with float slots.
19
For machines without wing slots float mode must be used. Adjust roller 1” or 25mm above surface.
15
Preliminarily adjust tilt approximately ¾” or 20mm higher at front. Run at operating speed & check adjustments in this order. Tracking in line . Lateral front disc adjustment Side coulter setting *NB all wing modules must be the same depth for correct tracking in line .
14
16/17 18/19
Depth (adjust deeper gradually).
15 19
What do you need your Speedtiller ® to do?
Comments
Pg
Mulch in trash for humus building
Shallower and faster better for mulching. Shallower gives more trash flow. May have to go slower if trash content is heavy. Adjust side coulter if necessary
15 14
19
Full ground disturbance for better weed control, trash flow & seed bed preparation.
Pay Specific attention to settings & operating conditions
Full ground disturbance starts at 2 ½” 60mm Cross working 15° off line is best to level soil and give better trash flow.
Soil moisture & conditions.
Page | 20
Made with FlippingBook - Online Brochure Maker