K-Line Ag © __________________________________________________
IDENTIFYING THE MACHINE FOR REQUESTING SPARE PARTS
The machine is identified by the serial number on the metal plate on the machine. When requesting spare parts or maintenance service, please indicate the model and number of your equipment to ensure prompt and efficient attention.
AVAILABILITY OF GENUINE PARTS
K-Line spare parts and accessories have been specifically designed and developed for the machines produced. We would call your attention to the fact that non-genuine parts and accessories are not recommended by K-Line. The use of such replacement parts frees K-Line from all liability and makes the warranty void. The installation and/or use of non-genuine parts may, because of technical characteristics of construction, may modify or influence the performance of the machine negatively.
AFTER DELIVERY
When you receive the machine, make sure that it has not been damaged during transportation and that no parts are missing. Only by giving us immediate advice can the necessary replacement parts be obtained. Ensure that all components are correctly adjusted.
TRACTOR REQUIREMENTS
10-14 Horsepower x width of machine in feet 25-35 kilowatt x meter width of machine in meters Tractor weight must be same as or greater than the towed unit.
Hydraulic valves
2 x Double spool (optional) 2800 PSI approximately
Hydraulic operating pressure
DEFINITIONS USED IN THIS MANUAL
Left
Right
Hand Side
Hand Side
2
Made with FlippingBook - Online Brochure Maker