LEGAL DISCLAIMER LAST UPDATED: 10/08/21
The information contained in the K-Line Industries Pty Ltd (also trading as “K-Line Ag” and “K-Line Agriculture”) manual is for general information purposes only. K-Line Industries Pty Ltd assumes no responsibility for errors or omissions in the contents of the book. In no event shall K-Line Industries Pty Ltd be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence with the use of the Service or the contents of the Service. K-Line Industries Pty Ltd reserves the right to make additions, deletions, or modification to the contents of this manual at any time without prior notice.
SPECIFICATIONS
MODEL SIZES
3445P
3460P
4.5M (14.8FT)
6M (19.FT)
OPERATING WIDTH APPROX.
9 (500MM) (20") 13 (350MM) (14") 4750KG (10500LB)
11 (550MM) (21.7") 13 (462MM) (18") 7000KG (15500LB)
NO.TINES (TINE SPACING)
WEIGHT APPROX.
3.6M (11.8FT) 2.5M (8.2FT) 5.45M (17.9FT)
4.2M (13.8FT) 3.5M (11.5FT) 5.75M (18.9FT)
TRANSPORT HEIGHT APPROX. TRANSPORT WIDTH APPROX.
TRANSPORT LENGTH
315-520HP (235-390KW)
385-520HP (285-390KW)
TRACTOR POWER RANGE*
TRACTOR HYDRAULIC REQUIREMENTS
STANDARD: 3 X DOUBLE SPOOL HYDRAULIC TINES: 3 X DOUBLE SPOOL + 1 X SINGLE SPOOL
HYDRAULIC REMOTES
2800 PSI (190 BAR) (19000KPA)
HYDRAULIC PRESSURE
HYDRAULIC FLOW CAPACITY REQUIRED MAXIMUM FLOW 10GPM (38 LITRES/MIN) FLOW ADJUSTABLE *TRACTOR POWER DEPENDANT ON NUMBER OF TINES. REFER PAGE 6 FOR TRACTOR POWER REQUIREMENTS
Figure 1
5
3400P SERIES FORWARD FOLD THUNDER RIPPER Ⓡ
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker