Q55 PIVOTING OUTFRONT COULTER SYSTEM
Mounting Procedures Before fitting the Q55 Coulter system to your machine, check manufacturer’s specifications for weight allowance and ballast recommendations. WARNING NEVER WORK UNDER OR ON MACHINE WITHOUT USING APPROVED JACK STAND SUPPORTS OR SERIOUS INJURY OR DEATH MAY RESULT.
1. Place machine in lifted position and support with jack stands
2. Attach 2 jack shafts/mount arms (for each tool bar) to machine
3. Attach tool bars (with pivots down) to machine
NB: Do NOT tighten yet
4. Slide coulter assemblies onto pivots and insert M16 pivot bolts into
position
5. Check for correct coulter to tine position. Coulters should be positioned in
line with tynes
6. Place remaining jack shafts into position and insert U-bolts
7. Tighten all bolts.
8. Adjust coulter height to ground level. (Refer to drawing no. 1)
9. The Q55 Coulter is not designed to operate with the coulter penetrating below the tine. Layout plan
Page 6 of 16
Made with FlippingBook - Online Brochure Maker