2830 2840TAT TrackAttack 3-4M Operator Safety Manual

F I E L D O P E R A T I O N

Your Track Attack is a high performer. You will need to become familiar with the settings and adjustments to get the full benefit of your new machine.

DEPTH CONTROL

Rear roller controls depth, • To work deeper adjust roller upwards. • To work shallower adjust roller downwards. • For initial depth setting start shallow. • Operate machine for short distance and stop. • Adjust depth control in small increments to achieve required depth. • Ensure modules operate at same depth.

Roller adjuster for depth control

TO ADJUST FORE & AFT TILT

Figure 14

• Adjust by turning top link to desired position and lock. After initial setting run machine at normal operating speed and stop. Stand behind machine to check if machine is tracking correctly.

Roller depth Adjustment

Loosen bolts & rotate radialy to adjust depth of cut. Re-tighten firmly

Figure 15

Adjustable outer filler disc (2 for each module)

2800 Track At tack ®

Operator & Safet y Manua l

1 5

Made with FlippingBook - Online Brochure Maker