2830 2840TAT TrackAttack 3-4M Operator Safety Manual

P E R F O R M I N G M A I N T E N A N C E

DAILY MAINTENANCE CHECK FOR OPTIMUM PERFORMANCE

Disc bolts - Check first 10hrs of operation

Before Starting Work:

1. Check all pivot pins are fastened and anchor bolts are correctly tensioned. Follow tension specification. 2. Check discs and disc bolt tension to specified torque 250ft lb / 340nm. 3. Check for damaged, worn and fatigued parts. Have machine repaired if necessary. 4. Ensure all appropriate safety decals are securely attached to machine – Refer to Pages 21-26 5. Check all safety mechanisms are in place and operating correctly. 6. Lubricate rear roller bearings. 7. Instruction manual has been read, understood and stored with machine.

Figure 21

Always reset adjustments after changing disc blades

Figure 22

Disc arm locating bolts - Check first 10hrs of operation

2800 Track At tack ®

Operator & Safet y Manua l

1 8

Made with FlippingBook - Online Brochure Maker