Field Operation
MACHINE SETTINGS
Your Track Attack is a high performing track renovator. You will need to become familiar with the settings and adjustments to get the full benefit of your new machine. REAR ROLLER DEPTH CONTROL Rear roller control depth: • To work deeper adjust roller upwards. • To work shallower adjust roller downwards. • For initial depth setting start shallow. • Operate machine for short distance and stop. • Adjust depth control in small increments to achieve required depth. • Ensure modules operate at same depth. FORE & AFT TILT ADJUSTMENT To adust fore & aft tilt: • Adjust by turning top link to desired position and lock. • After initial setting run machine at normal operating speed and stop. • Stand behind machine to check if machine is tracking correctly.
Roller adjuster for depth control
Figure : 4.1 Roller Adjuster
Roller Depth Adjustment
Loosen bolts & rotate radialy to adjust depth of cut. Re-tighten firmly.
Figure : 4.2 Adjustment Process
Adjustable outer filler disc (2 for each module)
4.34.3
2800TAT SERIES TRACK ATTACK
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker