S A F E T Y
TRACTOR REQUIREMENTS 3-4.5 Horsepower x width of machine in feet
HITCHING 1. Keep well clear when backing up to machine. 2. Shut down tractor. 3. Secure & lock drawbar pin in place. 4. Install safety chain by crossing the chains under the tongue and secure to the drawbar hitch frame of the tractor. 5. Clean all hydraulic couplings. Hydraulic valves 3 x Double spool Hydraulic operating pressure 2800 PSI approximately 7.5-10.5 kilowatt x meter width of machine in meters Tractor weight must be the same as or greater than the towed unit.
Figure 14
6. Beware of high pressure fluid. (See figure 15) 7. Plug in hoses to respective remote ports. 8. Release implement jack & store.
9. Check hydraulic cylinders are fully primed to avoid serious injury of death. 10. See page 19 to prime hydraulic system.
Figure 15
UNHITCHING • Machine must be fully lowered OR in transport position. • Release hydraulic pressure from system. • Lock implement jack in place. • Remove safety chains and drawbar pin. • Use wheel chocks. IF IMPLEMENT JACK IS DAMAGED DO NOT USE. REPLACE IMMEDIATELY, OR SEVERE BODILY HARM MAY RESULT.
Figure 16
UPTHRUST FORCE ON DRAWBAR ـ Tractor weight must equal machine weight ـ Drawbar pin must be firmly secured ـ Safety chains attached correctly Failure to complywill result in serious injury or death
BEWARE OF UPTHRUST ON DRAWBAR (See figure 17)
Figure 17
21
2740T TRASHCUTTER
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker