F I E L D O P E R AT I O N
Lay flat bar adjustment
SETTING & ADJUSTMENTS
Before adjusting in
the field YOU MUST: - Lower machine to ground level OR; - Placemachine in raised position & engage all safety locks. - Shut down engine.
Laybar
SPEED RANGE - 15-18 km/hr
SLOW DOWN in terrain such as rocks or other difficult operating conditions. WARNING: Use of machine beyond its limits or intent of operation will void warranty.
Rear height adjustment
Figure 27
IN FIELD SETUP FOR 9M(30FT) 12M (40FT) MACHINES
1. Set machine in working position. 2. Fully extend tilt rams.
3. In hard soils increase hydraulic disc down pressure to bring outer wing wheels 50-100mm above ground.
*NB In soft soils it is not necessary to raise outer wheels above ground level. 4. Operate machine with accumulator indicator between 5-8 (figure 28) 5. Adjust the front of the lay flat bars to sit between 50-100mm above ground level. ( see figure 27 ) 6. Adjust rear of lay flat bars to on or just above ground surface. (see figure 27)
Coulter disc down pressure accumulator indicator
Figure 28
IT IS THE RESPONSIBILITY OF THE OPERATORS TO: Read and understand your manual. Take time to familiarize yourself with the operation of this machine, particularly the safety signs and devices fitted to this machine.
25
2740T TRASHCUTTER
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker