Field Operation
MACHINE SETTINGS
RIPPER DEPTH ADJUSTMENT Ripping depth is set by the location of the roller adjust- ment pin. Ripping depth increases approximately 25mm for each hole moving forwards, and approximately 100mm for each hole moving upwards. For example, if the roller adjustment pin is located in the blue hole, the ripping depth will be approximately 150mm. If the roller adjustment pin is located in the yellow hole, ripping depth will be approximately 400mm. WARNING WHEN TURNING ON HEADLANDS LIFT THE RIPPER OUT OF THE GROUND
Figure : 4.1 Ripper Depth
3125D IN WORKING POSITION
Figure : 4.2 Ripper In Working Position
4.34.3
3100D Series lightning ripper
OPERATOR & SAFETY MANUAL
Made with FlippingBook - Online Brochure Maker