ASSEMBLY
CAUTION: Wear ANSI-approved safety goggles during the assembly process. CAUTION: Please wear gloves during the whole assembly process to avoid accidental personal injury. CAUTION: Assemble on a flat, level, and clean. A piece of cardboard or a floor covering is recommended to keep the product from being scratched during assembly. CAUTION: For components with protective film, please peel off the protective film before assembling it.
CAUTION: Do not use power tools during the assembly process.
Page 4 Attach Side Panels IMPORTANT! DO NOT fully tighten all screws until assembly is completed.
CAUTION! DO NOT overtighten the screws.
1
Attach the side panels (A, B) to the top panel (C) and the bottom shelf (D) using 8 screws #1. ATTACH THE SIDE PANELS, TOP PANEL, AND THE BOTTOM SHELF
C
#1
B
#1
A
D
Page 4 Attach hinge brackets Attach the hinge brackets (G) to the top panel (C) and the bottom shelf (D) using 12 screws #2 and 4 flat washers #4. Make sure the outer side of the hinge bracket is flush with the outer side or the top and bottom panels. Secure the side panels to the top panel with 4 screws #1. ATTACH THE HINGE BRACKETS 2
G
D
#2
#1
C
#2
#1
#4
SECURE SIDE PANELS
ENGLISH | 7
Made with FlippingBook - Online catalogs