F I E L D O P E R AT I O N
RAM STOP COMBINATIONS
*NB - INCHES DISPLAYED DO NOT INDICATE DIGGING DEPTH
Figure 35
USEFUL HINTS & PROBLEM SOLVING • Full ground disturbance starts at 60mm (2 1/2 inches). • Cross working 15 degrees off line gives better trash flow and soil leveling.
• Greater disturbance and weed control - Check lateral disc gang position - Assure machine is tracking in line
- May need more depth for deep rooted weeds MACHINE BLOCKING IN EXCESSIVE TRASH 1. If blocking on left side where smaller disc & soild deflector are located, adjust angle of soil deflector to allow a precentage of soil to be relieved from machine. 2. Raise front disc, (adjust tilt) work from discs at 40-45% & rear disc at 55-60%. 3. Adjust depth of cut. 4. Tyre reducing speed slightly 5. Ensure cut out is correct. CLOGGING IN WET SOILS 1. Raise working depth 2. Raise front discs 3. Give soil more time to dry out.
Fo l d i ng 3PL Speedt i l l er Power f l ex Ⓡ
Operator & Safet y Manua l
2 9
Made with FlippingBook - Online Brochure Maker