P E R F O R M I N G M A I N T E N A N C E
DAILY MAINTENANCE CHECK FOR OPTIMUM PERFORMANCE
Disc bolts - Check first 10hrs of operation
Before Starting Work:
1. Check all pivot pins are fastened and anchor bolts are correctly tensioned. 2. For field operation: Re-tension after 1st, 5th, then every 50 hours of operation. 3. For road travel re-tension first 3miles (5kms), 10miles (15kms), and thereafter at 25miles (40kms) intervals 4. Check discs and disc bolt tension to specified torque 250ft lb / 340nm 5. Check for damaged, worn and fatigued parts. Have machine repaired if necessary. 6. Ensure all appropriate safety decals are securely attached to machine. Pgs 12-16 7. Check hydraulic system is fully primed. Pg 18 8. Check all safety mechanisms are in place and operating correctly. 9. Lubricate rear roller bearings. Pg 32 10. Instruction manual has been read, understood and stored with machine.
Figure 36
Always reset adjustments after changing disc blades.
Figure 37
Disc arm locating bolts - Check first 10hrs of operation
Fo l d i ng 3PL Speedt i l l er Power f l ex Ⓡ
Operator & Safet y Manua l
3 0
Made with FlippingBook - Online Brochure Maker