ASSEMBLY
PREPARATION Before assembling the product, compare the parts against those listed in the manual. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service. CAUTION: For components with protective film, please peel off the protective film before assembling it. CAUTION: Wear ANSI-approved safety goggles during the assembly process. CAUTION: Please wear work gloves during the whole assembly process to avoid accidental personal injury. CAUTION: Assemble on a flat, level, and clean surface. A piece of cardboard or a floor covering is recommended to keep the product from being scratched during assembly.
CAUTION: Do not use power tools during the assembly process.
IMPORTANT! Do not fully tighten all screws until assembly is completed.
CAUTION! Do not overtighten the screws.
Connect the front upper brace (C) to the side panels (A and B) using 4 screws #1. Attach 2 brackets (E) to the back upper brace (D) using 4 screws #1. Connect the back upper brace (D) and 2 brackets (E) to the side panels (A and B) using 8 screws #1. CONNECT THE SIDE PANELS AND UPPER BRACES 1
SIDE PANELS AND CROSS BRACES P3
C
B
A
E
D
FRONT DETAIL SHOT P3
BACK DETAIL SHOT P3
#1
BACK UPPER BRACE
FRONT UPPER BRACE
6 | ENGLISH
Made with FlippingBook - Online catalogs