Programmable Logic Controllers
Back to Table of Contents
NX1P - Machine Automation Controllers
• Compact entry model with integrated motion and machine control. Connectivity to safety and vision systems • Up to 4 axes of coordinated motion control plus 4 axes point to point control • Expandable I/O using up to 8 NX series I/O cards on local bus • Built in EtherCAT and EtherNet/IP ports • Connect up to 16 EtherCAT Slaves • Sysmac Studio IDE for flexible, scalable programming
Training Services
Product Page
Fieldbus Communication Configuration
Built-In Digital I/O
Number of Coordinated axes*
Number of point-to- point axes**
Digital
Specifications
Total Axes
Option Boards
Model
Inputs
Outputs
1.5MB of programming memory, min cycle time up to 2ms
14 24 24
10 16 16
0 2 4
4 6 8
1 Slot
NX1P2-9024-DT1 NX1P2-1040-DT1 NX1P2-1140-DT1
4
2 Slots
**Point to Point axes Include: •
* Coordinated Axes Include: •
Only Point to Point Positioning
Point to Point Point Positioning
• •
No Synchronized Motion
•
Synchronized Motion (Gearing/Camming)
No Multi-Axes Coordinated Motion
• Multi-Axes Coordinated Motion (Circular/Linear Interpolation) • Axes grouping Note: PNP transistor Output options shown. For NPN options, go toautomation.omron.com Option Boards •
No Axes Grouping
Type
Description
Communication Protocol
Model
1 x RS-232C port Transmission Distance: 15 m Connector type: Spring terminal (9 terminals) 1 RS-422A/485 Transmission Distance: 50 m Connector type: Spring terminal (5 terminals) 1 RS-422A/485 port (isolated) Transmission Distance: 500 m Connector type: Spring terminal (5 terminals)
NX1W-CIF01
Host link, Modbus-RTU Master and no-protocol
NX1W-CIF11
Serial Communication
NX1W-CIF12
2 x Analog inputs Voltage input: 0 to 10 V (Resolution: 1/4,000) Input current: 0 to 20 mA (1/2,000) Connector type: Spring terminal (5 terminals) 2 x Analog inputs / 2 x Analog output Voltage input: 0 to 10 V (Resolution: 1/4,000) Input current: 0 to 20 mA (1/2,000) Voltage output: 0 to 10 V (Resolution: 1/4,000) Connector Type: Spring terminal (8 terminals)
NX1W-ADB21
Analog Inputs and Outputs
NX1W-MAB221
Note: The expansion cards of the NX1P machine controller line are the same as the NX Series I/O cards. For information on virtual axes, refer to the catalog on the website automation.omron.com
Software and Switches Type
Description
Model
Software
Sysmac Studio IDE Lite Version 1 License
SYSMAC-SE201L
Hub EitherCAT with 3 Ports Hub EitherCAT with 3 Ports Hub EitherNet/IP with 3 Ports Hub EitherNet/IP with 5 Ports
GX-JC03
GX-JC06
Hub
W451-03B W451-05B
Note: Tables include representative part numbers. Please consult the product page for more details.
Industrial Automation Core Product Catalog | Spring 2024
36
Made with FlippingBook - professional solution for displaying marketing and sales documents online