KM-214 Wheelchair Umbrella Holder (M Size Super Knuckle Arm) KUPOCARE Disability: physical The umbrella holder can hold any 13-35 mm diameter tubes and connects to the Wheelchair Tube Clamp base through the S size (6”) Super Knuckle Arm. The um- brella holder can hold an umbrella, a flag, a walking stick, a rod shape action camera, a flashlight or any other long cylindrical objects. The ball head on either end of the arm allows users to freely adjust the angle of mounted items and can be locked into position by tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loos- ening the central knob of the arm. This set mounts an umbrella, a flag, a walking stick, a rod shape action camera, a flashlight or any other long cylindrical objects any- where within a flexible 6” (15.2 cm) radius of a wheelchair tube. KM-215 KUPOCARE Wheelchair GoPro Holder (S size Super Knuckle Arm) KUPOCARE Disability: physical The GoPro holder can directly attach to the underside of the action camera to replace the factory mounting bracket and connects to the Wheelchair Tube Clamp base through the S size (3”) Super Knuckle Arm. The ball head on either end of the arm allows users to freely adjust the GoPro’s angle and can be locked into position by tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loos-
1/4”-20 and two 3/8”-16 female thread holes that allow for mounting devices using an additional Super Knuckle Arm. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loos- ening the central knob of the arm. This set mounts a phone within a flexible 9” (22.8 cm) radius of a wheelchair tube. KM-211 Wheelchair Camera Mount (L Size Dual Knuckle Arm) KUPOCARE Disability: physical In this set, the L Size (9”) Dual Knuckle Arm has a ball head with 1/4”-20 male thread on one end that is compatible with most cameras and camcorders. This arm is constructed by linking two S size arms with a 3” extension. The four ball heads of the arm allow users to adjust the mounted cameras to precise positions that suit their special needs. The extension arm has three 1/4”-20 and two 3/8”-16 female thread holes that allow for mounting devices us- ing an additional Super Knuckle Arm. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Su- per Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4”(32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosen- ing the central knob of the arm. This set mounts a camera or camcorder within a flexible 9” (22.8 cm) radius of a wheelchair tube. KM-212 Wheelchair AAC Switch Mount (L Size Dual Knuckle Arm) KUPOCARE Disability: physical This L size (9”) Super Knuckle Arm has a ball head with 1/4”-20 female thread on one end that matches the universal
ening the central knob of the arm. This set mounts a GoPro action camera anywhere within a flexible 3” (7.6 cm) radius of a wheelchair tube. KM-216 Wheelchair GoPro Mount (M Size Super Knuckle Arm) KUPOCARE Disability: physical The GoPro holder can directly attach to the underside of the action camera to replace the factory mounting bracket and connects to the Super Convi Clamp base through the M size (6”) Super Knuckle Arm. The ball head on either end of the arm allows users to freely adjust the GoPro’s angle and can be locked into position by tightening the central knob. The Wheel- chair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosen- ing the central knob of the arm. This set mounts a GoPro action camera anywhere within a flexible 6” (15.2 cm) radius of a wheelchair tube. KM-217 KUPOCARE Wheelchair GoPro Mount (L size Dual Knuckle Arm) KUPOCARE Disability: physical The GoPro holder can directly attach to the underside of the action camera to replace the factory mounting bracket and connects to the Super Convi Clamp base through the L Size (9”) Dual Knuckle Arm. This arm is constructed by linking two S size arms with a 3” extension. The four ball heads of the arm allow users to adjust the mounted phones to precise positions that suit their special needs. The extension arm has three 1/4”-20 and two 3/8”-16 female thread holes that allow for mounting devices using an additional Super Knuckle Arm. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm),
mounting system of AbleNet switches. This arm is constructed by linking two S size arms with a 3” extension. The four ball heads of the arm allow users to adjust the mounted AAC switches to precise positions that suit their special needs. The extension arm has three 1/4”-20 and two 3/8”-16 female thread holes that allow for mounting devices using an additional Super Knuckle Arm. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loosening the central knob of the arm. This set mounts an AbleNet switch or any equipment with 1/4”-20 male thread within a flexible 9” (22.8 cm) radius of a wheelchair tube. KM-213 Wheelchair Umbrella Holder (S size Super Knuckle Arm) KUPOCARE Disability: physical The umbrella holder can hold any 13-35 mm diameter tubes and connects to the Wheelchair Tube Clamp base through the S size (3”) Super Knuckle Arm. The um- brella holder can hold an umbrella, a flag, a walking stick, a rod shape action camera, a flashlight or any other long cylindrical objects. The ball head on either end of the arm allows users to freely adjust the angle of mounted items and can be locked into position by tightening the central knob. The Wheelchair Tube Clamp is equipped with a ball head that directly mounts into the Super Knuckle Arm. The Clamp can be tightly mounted onto wheelchair frame tubes and provides a very stable base. Given that there is no universal diameter for wheelchair tubes, three plastic spacers and a rubber strip are included allowing the clamp to fit 3/4” (19 mm), 7/8” (22.2 mm), 1” (25.4 mm), 1-1/8” (28.6 mm), 1-1/4” (32 mm) tubes. It is recommended to leave the tube clamp installed on the wheelchair so that it does not need to be remounted. The Super Knuckle Arm is easily released from the Wheelchair Tube Clamp by loos- ening the central knob of the arm. This set mounts an umbrella, a flag, a walking stick, a rod shape action camera, a flashlight or any other long cylindrical objects any- where within a flexible 3” (7.6 cm) radius of a wheelchair tube.
O T H E R A T
162
BACK TO CONTENTS
Closing The Gap © 2025 Closing The Gap, Inc. All rights reserved.
Made with FlippingBook Ebook Creator