2
Use a stud finder to locate and mark the centre lines of vertical studs. (If studs are not available, proceed to Step 3). LOCATE AND MARK WALL STUDS
SCREW HOLES 2.54 cm (1") APART
3
POSITION & MARK MOUNTING HOLES
Hold the Accessory Tile in the desired location, aligning the fastening holes spaced evenly along the upper and the lower rows of the tile with the stud centre lines. Use a level to ensure tile is level. Mark the wall through the fastening holes aligning with the stud centres. If studs are unavailable, use appropriately load-bearing mounting hardware (i.e. drywall anchors). TIP: At least 4 screws per panel—one in each corner—is recommended for secure mounting.
ENGLISH | 7
Made with FlippingBook - Online catalogs