Sliding 'T' Squares
Traditional Depth Gauge
WORKSHOP
Features • Working surfaces of the stock are ground • Hardened and tempered blade with a satin chrome finish
Features
The Moore & Wright Sliding ‘T’ Squares are practical, time saving tools for marking-out applications. Suitable for use as a parallel or as a double square, the Moore & Wright sliding ‘T’ Squares has ground working surfaces and features a hardened, tempered blade with a satin chrome finish.
Depth Gauge
• Available with either reversible base or protractor • Full range rule adjustment • Readings can be fixed by means of a locknut • Rules graduated on both sides • Metric scales front face graduations 0.5mm, 1.0mm • Metric scales rear face graduations 1.0mm • Metric / Imperial scales front face graduations 1/32nd • Metric / Imperial scales rear face graduations 1.0mm • Length of blade 195mm / 7.68" Reversible Base Type • Accurately ground top and bottom faces allow base to be reversed, for use in confined spaces
43
DS71041
343
342
44
Protractor Type
• Protractor plate is graduated 0º - 180º - 0º degrees • Scale resolution 1/2 degree
Traditional Depth Gauge - Metric
DS71056
Side of Base (mm)
Width (mm)
Thickness (mm)
Code No
Description
Sliding 'T' Squares - Metric
43
Reversible Base
5.5
18, 56
1.0
Length (mm)
Stock Length (mm)
Graduation (mm)
Code No
44
Protractor
5.5
79
1.0
DS71041
100
62
1, 0.5
Traditional Depth Gauge - Imperial
DS71051
150
62
1, 0.5
Side of Base (inch)
Width (inch)
Thickness (inch)
Code No
Description
Sliding 'T' Squares - Metric/Imperial
43
Reversible Base
0.22
0.71, 2.21
0.04
Length (mm/inch)
Stock Length (mm)
Graduation (mm/inch)
Code No
44
Protractor
0.22
3.11"
0.04
DS71044
100 / 4
62
0.5, 1 / 1/16
Visit our Website
DS71056
150 / 6
62
0.5, 1 / 1/16
For more information please click here
Bowers Group | sales@bowersgroup.co.uk | www.bowersgroup.co.uk
Go back to Contents
Made with FlippingBook Digital Proposal Creator