VISION SYSTEMS
User Friendly Software
• Simple and intuitive user interface designed with operator in mind. • Easy to use software allows creation of new inspections quickly and easily with minimal experience. • Dedicated functions for measuring gears, threads, O rings and springs. • CAD Import enables user to compare profiles to CAD model. • Auto-create complete inspections from an imported .dwg file, including dimensions and tolerance information. • Easy reporting including on screen pass / fail classification.
Automatic Inspection Reports
236
237
A range of Excel compatible reports are immediately available after each inspection, providing measurement data for each measurement including a pass / fail classification. Single part reports include a dimensioned image of the part for easy comparison to the drawing. Batch inspection results are conveniently compiled into a single batch report. Using character recognition, the software automatically detects identification numbers on each part and then lists the measured results against each part number. SPC data reports are also included as standard including normal distribution curves and CP, CPK calculations to monitor process capability.
Velo FV-1080V Specification
Measurement Range (mm)
Ø100 x 80
Accuracy (μm)
± 3
Repeatability (μm)
± 1
Image Sensor
20 Mega-pixels
Lens
ø100mm, ø100mm Bi-telecentric lens
Illumination System
Surface Light
Ring lighting (white LED)
Transmission Light
Telecentric Parallel Illumination (Green LED)
Dimensions (mm)
455×215×660
Weight (kg)
27
Max Load (kg)
3
Visit our Website
Environmental Spec
20°C ±2°C, relative humidity: 30%-80%, vibration:<0.002g, <15Hz
Voltage
220V~ 50Hz 600W
For more information please click here
Bowers Group | sales@bowersgroup.co.uk | www.bowersgroup.co.uk
Go back to Contents
Made with FlippingBook Digital Proposal Creator