Functional Gauge Thread Rolls
Thread Disk for Windows Software
THREAD MEASUREMENT
ISO Metric Series Thread Rolls
The Thread Disk™ engineering software (TDWin™ ) calculates critical dimensions for threads. Thread types supported by the program include: UN, UNJ and UNR Series, Acme, Stub Acme, Stub Acme Modified I and II, Metric M & MJ, 7° X 45° Buttress, and General Purpose Pipe Threads. To generate critical dimensions instantly, enter basic thread information on the Thread Type Entry screen, such as: thread type, thread class, nominal diameter, and
TRM thread rolls inspect the functional fit of machine threaded parts with ISO metric 60° "V" thread forms.
At a Glance
• Calculates standard and non-standard product thread diameters from #000 to 99.8"
Features
• Uses ANSI tables, formulas, and tolerances • Calculates ANSI ring and plug gage dimensions • Addresses pitches from 1 to 400 • Calculates Gagemaker style thread gage seting dimensions Sysem Requiements
threads per inch. Once the results are computed, tabs at the bottom of the program allow selection of several types of calculated information, including dimensions and tolerances for product threads, ring gages, set plugs, plug gages or Gagemaker’s Thread Diameter gages. If measuring internal and external shallow taper diameters is a problem, the Ball mic SET DIM Tool provides setting dimensions for ball micrometers or Gagemaker’s BX-1000 groove gage. The program calculates ball mic settings for any tapered surface geometry.
90-TRMI-4P
90-TRME-4P
• Windows XP or higher • 64 MB RAM • 3 MB of free hard disk space • CD-ROM drive
479
480
ISO Metric Series - Internal
ISO Metric Series - External
Code No
Code No
Description
Description
90-TRMI-4P
90-TRME-4P
4mm Pitch Internal 60° "V"
4mm Pitch External 60° "V"
90-TRMI-35P
90-TRME-35P
3.5mm Pitch Internal 60° "V"
3.5mm Pitch External 60° "V"
90-TRMI-3P
90-TRME-3P
3mm Pitch Internal 60° "V"
3mm Pitch External 60° "V"
90-TRMI-25P
90-TRME-25P
2.5mm Pitch Internal 60° "V"
2.5mm Pitch External 60° "V"
90-TRMI-2P
90-TRME-2P
2mm Pitch Internal 60° "V"
2mm Pitch External 60° "V"
90-TRMI-175P
90-TRME-175P
1.75mm Pitch Internal 60° "V"
1.75mm Pitch External 60° "V"
Thread Type Entry Screen
Thread Dimension Screen
90-TRMI-15P
90-TRME-15P
1.5mm Pitch Internal 60° "V"
1.5mm Pitch External 60° "V"
TDWIN Thread Disk Software
Code No
Description
90-TDWIN
Thread Disk for Windows Software
90-TDWIN-UP
Upgrade to TDWIN from TD-100
90-TDWINLIC5
Multi-Licence Agreement, 5 Users
90-TDWINLIC10
Multi-Licence Agreement, 10 Users
Bowers Group | sales@bowersgroup.co.uk | www.bowersgroup.co.uk
Go back to Contents
Made with FlippingBook Digital Proposal Creator