APPLICATION GAUGING
Tyre Tread Depth Gauge Features • The gauge can be supplied with a calibration certificate traceable to national standards if required. • Tyre gauge comes supplied in a pvc wallet.
Crankshaft Alignment Gauge Set
The Baty tyre tread depth gauge has been specially designed to measure the remaining tread depth on motor vehicle tyres to a very high degree of accuracy. Many simple gauges currently available give only an approximate indication of depth, and have been found inaccurate up to 0.5mm. Such errors could be the difference between legal and illegal! The Baty tyre tread gauge has colour-coded bands on the dial GREEN BAND : tread depth in excess of 2mm and is therefore safe/legal YELLOW BAND: tread depth between 2mm and 1.6mm: depth legal but CAUTION – tyre will need replacing very soon RED BAND : tread depth less than 1.6mm: ILLEGAL! Tyre must be replaced
If an engine crankshaft is not correctly aligned in its bearings, it distorts and becomes subject to damaging stresses. Any misalignment causes a change in the distance between webs when the shaft revolves and can be detected by placing an indicating device between the webs. The Baty Crankshaft Alignment Gauge is designed for this purpose. Its contacts are pointed and fit into dimples in the webs. A heavy spring pressure ensures that the gauge is retained but is free to turn in relation to the crankshaft and an adjustable balance weight restrains the gauge against rotation of the crankshaft so that the dial always faces the inspector.
Features
• The gauge covers web-to-web distances of 57-500mm (21/4"-20") • Set supplied in a wooden case • The special dial indicators may be purchased separately
146
147
TG10-BM/1
Tyre Tread Depth Gauge
Code No
Description
Visit our Website
TG10-BM/1
Tyre Tread Depth Gauge Kit
For more information please click here
TG10-13/B
Tyre Tread Depth Gauge Setting Piece
Bowers Group | sales@bowersgroup.co.uk | www.bowersgroup.co.uk
Go back to Contents
Made with FlippingBook Digital Proposal Creator