Section 10 – Mandatory and Task Specific PPE
Note – All PCC ’s personal protective equipment will be branded.
Item
Description
Black hat for supervisors
Safety hard hat
Steel toe cap
Safety footwear
Yellow
High visibility vest/clothing
Operatives will be face fit tested
Face/dust mask
Impact resistant
Safety glasses/
Suitable
Safety gloves
Suitable
Overalls
Additional tasked specific PPE will be worn and used by the operative(s) as per CoSHH safety data sheet references, as for plant equipment additional tasked based PPE will be worn as per manufacture user instructions.
Hearing protection
• • •
Knee pads
Face coverings
Note: • Operatives have a duty of care to visually inspect their PPE before each use; any obvious defects should be reported to the supervisor immediately. • Operatives shall respect their PPE supplied to them by their employer. • Operatives shall maintain their PPE and ensure it is kept in a safe holding during out of hours.
Section 11 – Tools, Plant & Equipment
Tools, Plant & Equipment:
PCC’s equipment during the internal painting process will consist of general hand tools, paint brushes, step; adders and mobile towers, holding and clamping tools, mixing equipment and plant, bench cutters, cutting knives, warning signs and temporary manifestation, safety barriers/ cones, small hop up, step ladder, swing gated podiums.
Note: PCC will monitor the tools and equipment being used for our internal painting working activities and will review the methodology accordingly.
PC Contracting – Mulgrave Theatre _Painting & Decorating Final Coatings
Made with FlippingBook Digital Publishing Software