GWO ADVANCED RESCUE TRAINING STANDARD V02.1 – SINGLE RESCUER: NACELLE, TOWER & BASEMENT RESCUE
2020-10-01_TS_ART_V02.1
outside tower to nacelle/Heli platform, using a rescue stretcher and/or transfer board, raising rescue system (power driven rescue system). (L3 – Skill) 7) Demonstrate how to change directly from balancing an injured person from a horizontal position to a vertical configuration (and vice versa), when suspended. (L3 – Skill) 8) Demonstrate how to perform rescue operations, using the casualties personal fall protection on the injured person - as fall protection backup, if required. (L3 – Skill) 9) Demonstrate how to perform scene assessment and hazard identification, assessing and determining the rescue strategy. (L3 – Skill) 10) Demonstrate how to apply clear communication and guidance to other emergency responders (e.g. helicopter crew or ambulance crew) including coordinating the handover of an injured person. (L3 – Skill) 11) Demonstrate how to utilize a rescue device in an active setup (i.e. the rescue device attached onto the injured person) during an inside rescue up operation inside of the tower/basement. (L3 – Skill)
Note: One inside rescue up exercise for one course participant
It is recommended that a rescue dummy is used for the following exercises
Note: Preparing the injured person, rescue up from either basement to primary assembly area (ground/transition piece) or from transition piece inside tower to nacelle/Heli platform, and rescue device in active setup
Note: Exercise includes: Rescue strategy planning, rescue efforts and Instructor-Led evaluation
RESCUE UP - INTRODUCTION
The Instructor shall:
Explain the necessity and relevance of this module Explain that the pre-use inspection of rescue equipment may be omitted only if it permitted by the manufacturer’s manual and the manufacturer criteria or the course participants own organisation Demonstrate how to perform a pre-use inspection of the power-driven lowering / raising rescue system required / chosen to deliver this module, by following the principles of and covering: a. Markings and labels b. Equipment is within the period of formal inspections c. The product operating temperature range, in particular relevant for the associated battery power source in low temperatures d. Checking integrity and the absence of damage, corrosion, saltwater / chemical / lubricant / dirt exposure or contamination e. Operation including taut (drill chuck) attachment to the rescue device
GLOBAL WIND ORGANISATION www.globalwindsafety.org
116 / 149
Made with FlippingBook - professional solution for displaying marketing and sales documents online