GWO ART v 2.1

GWO ADVANCED RESCUE TRAINING STANDARD V02.1 – SINGLE RESCUER: HUB, SPINNER & INSIDE BLADE RESCUE

2020-10-01_TS_ART_V02.1

Demonstrate how to rig and operate the lowering/raising rescue system in a proper manner aiming to achieve a safe and efficient rigging setup, including the utilization of an injured person personal fall protection equipment backup system, if required Demonstrate how to apply rescue methods, techniques and clear communication in performing safe lowering/raising rescue operations from inside a WTG blade Demonstrate how to perform regular checks of the injured person during the entire rescue operation Demonstrate how to perform a rescue operation, from a WTG blade, through the hub and e.g. out of the hub or into the nacelle Demonstrate how to reduce the risks associated with manual handling and apply further control measures where applicable

HUB RESCUE EXERCISE 3 & 4 (FROM SPINNER)

90 min. The aim, learning objectives and elements mentioned in lesson 4 above apply to this lesson as well - but from inside the spinner.

Additionally, to successfully complete this lesson of the module, course participants must be able to:

1) Transport the injured person to the escape hatch by means of a zip line (areal ropeway), to control the handling of injured person more efficiently and reduce manual handling

Note: One course participant per exercise.

It is recommended that a rescue dummy is used for these exercises.

HUB RESCUE EXERCISE 3+4 (FROM SPINNER)

The Instructor shall conduct the elements mentioned in the elements of lesson 4 above which applies to this element as well - but related to the spinner

Additionally, the instructor shall:

Highlight the relevant differences in rescue strategy of this specific exercise scenario, compared to the blade rescue strategy (anchor points, rigging of the lowering/raising rescue system, deviation, techniques, etc.) Explain the concept of a tensioned line (zip line) in a nacelle, how to rig it and adhering hazards and risks

HUB RESCUE EXERCISE 3+4 (FROM SPINNER)

Course participants shall demonstrate and on request explain, how to conduct the elements mentioned in the lesson elements above (lesson 4) which applies to this element as well - but related to the spinner

GLOBAL WIND ORGANISATION www.globalwindsafety.org

95 / 149

Made with FlippingBook - professional solution for displaying marketing and sales documents online