Product Guide
2022 All Balls Racing Group
HOT START PLUNGER KITS
FUEL TAP REBUILD KITS
+ Includes components to rebuild one Fuel Tap. + Kit includes all necessary face screws, tank bolts, face gasket, tank gasket, diaphragm, o-rings, wave washer, and misc. components. + Non-rebuildable riveted Honda specific Kits include special drill and self-taping screws along with instructions for easy and inexpensive rebuild.
+ Kit includes all necessary parts to rebuild the hot start plunger circuit. + Kit includes necessary o-rings, springs, retaining nut , boots and cable guide, if applicable. + Hot start plungers can seize or can easily be lost during a carburetor rebuild. + Improperly functioning parts can cause hard starting or poor running conditions.
HOSE AND CLAMP KITS
MIKUNI HSR CARBURETOR JET KITS
+ Direct OEM replacement at a fraction of the cost. + Includes OEM style and shaped fuel hose as well as OEM style clamps. + Heat shields match OEM style. + Fuel line meets CARB and EPA permeation guidelines.
+ Kit includes all parts necessary for tuning a Mikuni HSR carburetor. + Includes a range of main, pilot, and accelerator pump jets. + Includes a range of slide needles.
HOSE CLAMP KITS
MIKUNI HSR CARBURETOR GASKET KITS
+ Kit comes with 4 of each All Balls Racing fuel line OEM replica clamps, for a total of 112 total clamps. + Available in 28 sizes from 7-17mm I.D. + Each clamp is an exact replica of the major OEM's fuel line clamps, and is manufactured to meet or exceed OEM performance, aesthetics, and fit. + Box labeled with part numbers for each clamp size, making 4 pack replenishment orders simple. + 4 pack refills available
+ NBR rubber material is used on all o-rings and rubber gaskets. NBR has excellent resistance to the ethanol used in today’s fuels. + All gaskets and o-rings include: spigot body gasket, float bowl, carburetor cap, spigot body screws, fuel mixture screw with
spring, washer, o-rings, float needle valve with FMK tip, and accelerator pump boot
INJECTOR O-RING KITS
+ Factory fuel injection system seals and o-rings can be damaged during removal and can also degrade over time. + Kits include every o-ring, gasket and seal you need to keep your machine running like new. + Each kit includes all o-rings,
gaskets and seals needed for your fuel injector and throttle body systems.
22 | FUEL
515.402.8000
Made with FlippingBook - Online catalogs