Product Guide
2022 All Balls Racing Group
A-ARM / IRS - BUSHING ONLY
A-ARM AND IRS - POLARIS, CAN-AM, ARCTIC CAT
+ Upgraded polyurethane material is designed to be a tighter, more precise fit.
+ New series of kits now include hardened and precision ground pins that replace the OEM plated mild steel pins. + Upgraded polyurethane material is designed to be a tighter, more precise fit. + Bushing only kits also available separately.
+ 2 kits required per vehicle
A-ARM - FRONT REPAIR KITS
A-ARM KITS - FRONT/REAR, UPPER/LOWER
+ A direct OEM replacement. + Each kit contains all of the bearings/bushings, bearing shafts, seals, shims and
+ All kits come complete with the necessary hardware to do both the left and right sides. + Upper and lower kits sold separately. + Bushings included with Can-Am
spacers required to rebuild one A-Arm.
& Polaris applications have been upgraded to machined acetal resin bushings with an
integrated o-ring seal and grease reservoir grooves. + Some kits are a bearing upgrade to OEM bushings.
A-ARM - REAR INDEPENDENT SUSPENSION REPAIR KITS
+ Kit contains all of the
components required to rebuild the upper and lower A-Arm & knuckle. + Self-lubricating Acetal nylon bushings protect better against wear and performance. + Needle bearing shafts are made with 52100 bearing steel that has been hardened and precision ground.
A-ARM / IRS - KNUCKLE ONLY
+ A direct OEM replacement. + Each kit contains all of the bearings/bushings, bearing
shafts, seals, shims and spacers required to rebuild one rear knuckle at the pivot locations.
+ 2 Kits required per vehicle.
A-ARM - UPGRADE KITS KAWASAKI BRUTE FORCE
+ The OEM design uses (2)
FORK AND DUST SEAL KITS
spherical bearings to carry the thrust load of the entire front end. Once the spherical bearings begin to wear the external seals become
+ The seal profile is engineered so that each seal lip places equal pressure on the fork tube. Equalized seal pressure creates less drag and longer seal life. + The seal incorporates a 3rd seal lip which acts as an additional dust wiper to keep the fork tubes clean of dirt and grit. + Dust Seals features external garter springs to keep the fork tubes clean.
ineffective due to excess play allowing water and debris to enter the assembly. + (12) Machined acetal shoulder bushings and hardened steel pins carry the load greatly extending the life of the A-Arm assembly. + Kit contains all the parts needed to upgrade all four A-Arms
SUSPENSION | 3
515.402.8000
Made with FlippingBook - Online catalogs