OFFROAD
2022 All Balls Racing Group
SUZUKI DR-Z 400 E continued
ALL BALLS RACING
KIT TYPE
YEAR
PART # 22-1013
KIT TYPE
YEAR
PART # 45-2042 45-1183
STEERING BEARING KIT
CABLE - CLUTCH CABLE - THROTTLE
2000-2003
2000-2003 2000-2003
PIVOT WORKS KIT TYPE
YEAR
PART #
STEERING STEM BEARING KIT
2000-2003 PWSSK-S04-421
ALL BALLS RACING
KIT TYPE
YEAR
PART # 18-7003 18-7004 18-3005 18-3028 18-1002
KIT TYPE
YEAR
PART # 18-1007 18-9007 18-9011 18-8062
BRAKE PAD RETAINING PIN KIT FRONT BRAKE PAD RETAINING PIN KIT REAR
MASTER CYLINDER REBUILD KIT REAR
2000-2003 2000-2003 2000-2003 2000-2003 2000-2003
2000-2003 2000-2003 2000-2003 2000-2003
FRONT CALIPER PISTON KIT REAR CALIPER PISTON KIT SINTERED BRAKE PAD REAR
CALIPER REBUILD KIT FRONT CALIPER REBUILD KIT REAR
MASTER CYLINDER REBUILD KIT FRONT
ALL BALLS RACING
KIT TYPE
YEAR
PART # 79-5002 79-5001 25-1753
KIT TYPE
YEAR
PART # 25-1117 11-1057
CHAIN ROLLER LOWER CHAIN ROLLER UPPER WHEEL BEARING KIT FRONT
WHEEL BEARING KIT REAR WHEEL SPACER KIT FRONT WHEEL SPACER KIT REAR
2000-2003 2000-2003 2000-2003
2000-2003 2000-2003 2000-2003
11-1048-1
PIVOT WORKS
KIT TYPE
YEAR
PART #
KIT TYPE
YEAR
PART #
FRONT WHEEL BEARING KIT
REAR WHEEL BEARING KIT
2000-2003 PWFWK-S24-000 2000-2003 PWFWC-S08-500
2000-2003 PWRWK-S17-400 2000-2003 PWRWC-S05-500
FRT WATERPROOF WHEEL BEARING & SPACER KIT
RR WATERPROOF WHEEL BEARING & SPACER KIT
SUPERSPROX PRODUCT
YEAR
DESCRIPTION
PART #
FRONT BASE # CST-432
OEM FRONT TOOTH COUNT
REAR BASE #
OEM REAR TOOTH COUNT
OEM CHAIN PITCH
OEM CHAIN LENGTH
SPROCKETS
2000-2003
See reference page 1682 for all sizes and colors
FTC-14
R-808
RTC-47
P-520
L-112
ALL BALLS RACING
KIT TYPE
YEAR
PART # 25-4025
KIT TYPE YEAR PART # SPROCKET RETAINER KIT 10 PK WASHERS OR SNAP-RINGS 2000-2003 25-6002
COUNTERSHAFT SEAL KIT CYLINDER WORKS KIT TYPE STANDARD BORE CYLINDER STANDARD BORE CYLINDER KIT STANDARD BORE CYLINDER KIT
2000-2003
YEAR
DESCRIPTION
PART # 40001
2000-2007 2000-2007
Standard Bore 90mm
Standard Bore Cylinder Kit. 11.3:1 Comp. 90mm. Includes (Cylinder, Piston Kit, & Top-End Gasket Kit). Uses Vertex #22951.
40001-K01
40001-K01HC
2000-2007 Standard Bore Hi-Comp Cylinder Kit. 13.5:1 Comp. 90mm. Includes (Cylinder, Piston Kit, & Top-End Gasket Kit). Uses Vertex #23550. 2000-2007 +4mm Big Bore Cylinder Kit. 434cc. 11.3:1 Comp. 94mm. Includes (Cylinder, Piston Kit, & Top-End Gasket Kit). Uses Vertex #23533. Makes 462cc when used with Hot Rods Crankshaft #4259.
BIG BORE CYLINDER KIT
41001-K01
BIG BORE GASKET KIT
2000-2007
+4mm Big Bore Top-End Gasket Kit. 94mm. Includes (Head, Base, Exhaust, & Cam Chain Tensioner Gaskets).
41001-G01
HOT CAMS KIT TYPE
YEAR
DESCRIPTION
PART #
CAMSHAFT CHAIN SILENT KIT
2000-2007
Silent chain: Exclusive heat-treatment of links creates excellent friction and impact resistance: Meets or exceeds OEM specifications and tolerances
HC82RH2010128
CAMSHAFT EXHAUST
2000-2007 Stage 1 exhaust cam: Increased low-end and mid-range power than OEM with no loss on the top-end: For best results it should be used with the #2249-1IN intake cam: Uses stock DRZ400 valve springs: If installed in anything other than DRZ400 you must install DRZ400 valve springs: Dual-cam engine: Intake and exhaust cams sold separately: Off-road competition use only: Supplied with decompression mechanism 2000-2007 Stage 2 exhaust cam: Increased mid-range and top-end power than OEM with no loss on the bottom-end: For best results it should be used with the #2251-2IN intake cam: Uses stock DRZ400 valve springs: If installed in anything other than DRZ400 you must install DRZ400 valve springs: Dual-cam engine: Intake and exhaust cams sold separately: Off-road competition use only: Supplied with decompression mechanism 2000-2007 Stage 1 intake cam: Increased low-end and mid-range power than OEM with no loss on the top-end: For best results it should be used with the #2250-1E exhaust cam: Uses stock DRZ400 valve springs: If installed in anything other than DRZ400 you must install DRZ400 valve springs: Dual-cam engine: Intake and exhaust cams sold separately: Off-road competition use only 2000-2007 Stage 2 intake cam: Increased mid-range and top-end power than OEM with no loss on the bottom-end: For best results it should be used with the #2252-2E exhaust cam: Uses stock DRZ400 valve springs: If installed in anything other than DRZ400 you must install DRZ400 valve springs: Dual-cam engine: Intake and exhaust cams sold separately: Off-road competition use only
2250-1E
CAMSHAFT EXHAUST
2252-2E
CAMSHAFT INTAKE
2249-1IN
CAMSHAFT INTAKE
2251-2IN
VALVE EXHAUST STEEL
2000-2007
Steel exhaust valve: Forged: Precision machined: Nitride coated: Compatible with OEM keepers and retainers: Designed and manufactured to meet or exceed OEM specs and standards
8400009-1
HOT RODS KIT TYPE BOTTOM END KIT BOTTOM END KIT
YEAR
DESCRIPTION
PART #
2000-2007 Kit contains crankshaft, main bearing/seals and complete gasket set for complete installation. DOES NOT fit kickstart applications! 2000-2007 Kit contains Heavy Duty (+4mm stroker) crankshaft, main bearing/seals, and complete gasket set for complete installation. Makes 424cc. When using Cylinder Works #41001-K01 makes 462cc. Does NOT fit kickstart applications.
CBK0095
CBK0165
CONNECTING ROD KIT COUNTER BALANCER KIT
2000-2007 2000-2007 2000-2007 2000-2007 2000-2007
8630
BBK0018
CRANKSHAFT
4059 K049
MAIN BEARING AND SEAL KIT STROKER CRANKSHAFT
4259
Heavy Duty (+4mm stroker) makes 424cc. Uses stock piston. Bolt in and go! When using Cylinder Works #41001-K01 makes 462cc. Does NOT fit kickstart applications.
TRANSMISSION BEARING KIT
2000-2007 2000-2007
TBK0090 WPK0053
WATER PUMP KIT
596 | SUZUKI
515.402.8000
See supplemental pricing guide | Pricing subject to change |
Not legal for sale or use in California
Made with FlippingBook - Online catalogs