Half Cut Select whether or not to make half-cuts. For details, see “Half Cut (Kiss Cut) Settings” on page 28. Cut Pressure (Half Cut) Specify the cutting pressure for half-cuts. Blade Adjustment Area Select from 1/4, 1/2, 3/4 or whole cutting area to be used for blade adjustment. Before cutting out a pattern, this machine performs an automatic blade adjustment, which adjusts the direction of the blade outside of the adhesive area of the mat.
Memo • When multiple patterns are cut at the same time, the setting specified in this screen is applied to all patterns. • If cutting line data saved with a different seam allowance is imported and used, the setting specified in this screen will have priority over the saved setting. Fill Select the design that will be used to fill patterns. For details, see “Using Drawing Functions to Fill Patterns/ Make Outlines Thicker” on page 67. Additional Line With [Number of Additional Line], specify the number of lines to be added. With [Additional Line Spacing], specify the spacing of the lines to be added. Memo • For details for Fill and Additional Line setting, refer to “Using Drawing Functions to Fill Patterns/Make Outlines Thicker” on page 67.
1
• With each press of the left or right arrow key, the size of the blade adjustment area changes by 1/4.
■ Group 4
1
2
3
4
a 1/4 b 2/4 c 3/4 d Entire area
Auto Shutdown Specify the length of time for the auto shutdown function. The setting can be specified in 1-hour increments. For details, see “Auto Shutdown” on page 12. Buzzer Sound Select whether or not an operation sound is produced, for example, when a key is touched. Opening Screen Select whether the opening slide show is displayed after the machine is turned on. If the slide show is displayed, touch the screen to display the home screen. Scanning/Cutting Position Adjustment The scanning/cutting position can be adjusted. To adjust the position, touch this button to display the settings screen. For details, see “Adjusting the Scanning/Cutting Position” on page 92.
Draw Speed
Adjust the drawing speed.
Draw Pressure Adjust the drawing pressure. Adjustments to the
drawing pressure will affect the finished product. Use the same material that the pattern will be drawn on to make the adjustments in advance. If the pressure is too high, the pen tip may be damaged. Adjust the pressure appropriately.
■ Group 3
Seam Allowance Specify the seam allowance. This is applied when drawing on fabric, then cutting it, for example, when making quilt pieces. For details, see “Cutting Around Drawings” on page 63.
11
Made with FlippingBook - professional solution for displaying marketing and sales documents online