b Cut the iron-on fabric appliqué contact sheet to a size 2 cm (3/4") or more larger than the outline of the pattern to be cut.
e Peel off the backing from the contact sheet. Before peeling off the backing, allow all parts to cool.
b
b
a
c
a
a Contact sheet b Backing
f With the side of the fabric that the contact sheet is attached to facing down, attach the material to the mat from its edges. Slowly attach the entire surface of the material from its edges while pressing out any air with a ruler, etc., so that no air is trapped between the mat and the material.
a Pattern to be cut b Cutting line of sheet c Margin of 2 cm (3/4") or more c With the glossy side of the contact sheet facing down, place it on the wrong side of the fabric. Be sure to first iron the fabric to remove any wrinkles. Before placing the contact sheet on the fabric, make sure that the fabric has been allowed to cool after ironing.
a
b
a Glossy side of contact sheet b Wrong side of fabric d Evenly iron the entire contact sheet to affix it to the wrong side of the fabric. With the iron on a medium temperature setting (140 °C to 160 °C (284 °F to 320 °F)), press each part of the sheet for about 20 seconds (the length of time differs depending on the material). Be sure to apply pressure on the top of the backing and push out any air between the sheet and fabric.
Note • Place the material within the attaching area (grid area) on the adhesive side. If the material extends from the attaching area, it may be damaged by the feed rollers when the mat is fed. • Insert the mat into the machine in the direction of the arrow. Pay attention to the mat’s orientation to avoid inserting the mat in the wrong direction. Memo • Be sure that the vertical grain of the attached fabric runs straight up and down. The built-in patterns are automatically arranged suitable for fabric with vertical grain. g Firmly attach all of the material to the mat so that there are no wrinkles and no part can curl off. • Otherwise, curls in the material may become caught when the mat is inserted.
a
a Backing
Note • Before attaching the contact sheet to the fabric, use a piece of the sheet to test attach it. If any problems occur when test attaching, use different material. • Leaving the iron in the same place for too long may scorch or melt the material.
18
Made with FlippingBook - professional solution for displaying marketing and sales documents online