c Grasp the holder grip, and then insert the holder into the carriage.
Installing and Uninstalling the Holder
Select the holder appropriate for the material, and then install it into the machine. For details on the holder appropriate for the material, see “Blade and Material Combination” on page 23. a Press in the operation panel to turn on the machine. For details, see “Turning On/Off the Machine” on page 8.
a
Note
• Be sure to turn on the machine before installing the holder. • If the holder is installed while the machine is off, the blade may break and material may not be cut cleanly.
a Grip d Push down on the holder lock lever. Firmly push down until the holder is locked in place.
b Remove the protective cap.
a
a Holder lock lever e Reverse the installation procedure to uninstall the holder. WARNING • This is not a toy and is not intended to be used by children. In order to prevent choking hazards, do not allow infants/children to put the protective caps in their mouths. CAUTION • After removing the blade holder from the machine, be sure to attach the protective cap. • Do not press the tip of the holder with your hand or fingers because the tip of the blade will extend and may result in injuries.
WARNING • This is not a toy and is not intended to be used by children. In order to prevent choking hazards, do not allow infants/children to put the protective caps in their mouths. CAUTION • Please remove protective cap from blade holder before placing it into the machine carriage. • Do not press the tip of the holder with your hand or fingers because the tip of the blade will extend and may result in injuries.
24
Made with FlippingBook - professional solution for displaying marketing and sales documents online