■ Loading the Mat a Attach the material that will be cut to the mat. • For details on attaching material to the mat, see “Attaching the material to the mat” on page 16. b While holding the mat level and lightly inserting it into the feed slot, press in the operation panel. Insert the tip of the mat so that it aligns with the guides on the left and right sides of the feed slot and is tucked under the feed rollers. Insert the end of the mat marked with an arrow into the machine.
■ Cutting a Select “Cut” in the test screen.
b
b
a
a
Note • To make half cuts (kiss cuts), turn on half cut (kiss cut) in the settings screen. For details on specifying the settings, see “Half Cut (Kiss Cut) Settings” on page 28.
b Touch the "Start" key to start cutting.
a Guides b Feed rollers
When cutting is finished, the message “Finished cutting.” appears on the display. Touch the “OK” key to return to the test screen.
The mat is fed in to complete the preparations for cutting.
Note • Do not forcefully pull the mat while it is being fed in. Otherwise, damage, for example, to the feed rollers, may result.
26
Made with FlippingBook - professional solution for displaying marketing and sales documents online