b After selecting the cutting/drawing pattern, touch in the mat layout screen to start the background scanning function.
Scanning a Background Image
In this example, we will use material with a cutout in its upper-left corner as a background image.
The following message appears.
Memo • The background scanning function is also useful when cutting out patterns from material with a design on it. By arranging the patterns on the screen in the desired patterned area of the material, cutouts with a specific design can be created.
c Touch the "Start" key to start scanning.
After the material has been scanned, it appears as the background in the mat layout screen.
a
• This function cannot be used when an optional scanning mat is used. • Depending on the machine model, the sizes of mats that can be used will differ. Check the “Maximum Scanning Area” under “Machine Information” of the settings screen. For details, refer to “Settings Screen” on page 10. a Attach the material for the background to the mat, and then press in the operation panel. For details on preparing the material and loading the mat, see “Loading the Mat” on page 26.
a Material with a cutout displayed as background Memo • If it is difficult to see the arranged patterns, adjust the background contrast in the settings screen. Touch in the mat layout screen to display the settings screen.
: Makes the background image darker.
: Makes the background image lighter.
: Does not display the background image.
50
Made with FlippingBook - professional solution for displaying marketing and sales documents online