c Raise the scanner lever (on the left side of the machine) to “2”.
Note • If the drawing pressure is too high, the pen tip may be damaged. Adjust it to an appropriate setting. Memo • Adjustments to the drawing pressure will affect the finished product. Use the same material that the pattern will be drawn on to make the adjustments.
g Touch the “Start” key to start drawing.
3
d Load the mat with the material for drawing (cutting) attached. • Lightly insert the mat into the feed slot, and press in the operation panel. • For details on inserting the mat, see “Loading the Mat” on page 26.
Note
• After use, remove the pen from the pen holder, and then attach the cap to the pen before storing it.
Cutting Around Drawings
In this example, we will specify a seam allowance for a built-in pattern and draw the pattern, then cut an outline around it. ■ Specifying the Seam Allowance a Select the pattern to be drawn, and then touch the “Set” key.
e Select “Draw” in the preview screen.
The mat layout screen appears.
b Touch the “Edit” key.
The drawing line (blue) appears. f Adjust the drawing speed and pressure.
Before drawing the pattern, adjust the drawing speed and pressure. These adjustments can be made from the settings screen. Touch .
Touch
or
to change the settings.
63
Made with FlippingBook - professional solution for displaying marketing and sales documents online