c Touch the “Preview” key to confirm the trimmed area.
Color recognition mode a In the image trim screen, use the touch pen to drag to trim the image to the size to be imported, and then touch the “OK” key.
Only the cutting lines appear. d Touch the “OK” key in the mat layout screen.
Memo • Trimming the image to the desired size can reduce the amount of time required to convert it to cutting data. b Check the imported image in the image editing screen. The created cutting data appears as black lines.
• Touch the “Edit” key to fill patterns or make outlines thicker. For details, see “Using Drawing Functions to Fill Patterns/Make Outlines Thicker” on page 67. In addition, a pattern can be deleted, or multiple patterns can be selected. For details on selecting multiple patterns, see “Selecting Multiple Patterns” on page 38. • Touch or to edit the imported cutting data. For details, see “Advanced Cutting Functions for “Direct Cut”” on page 73. e Select “Cut” in the preview screen.
a
b
d
c
a Image Detection Level Key If the cutting lines were not correctly detected, change the number of colors to be detected. If a color that appears as a single color is detected as separate colors, reduce the number of colors. If adjacent colors with a similar brightness are detected as a single color, increase the number of colors.
f Touch the "Start" key to start cutting. • For details on unloading the mat after cutting, follow the procedure under “Unloading the Mat” on page27.
72
Made with FlippingBook - professional solution for displaying marketing and sales documents online