d Select “Cut” in the preview screen.
original
e Touch the "Start" key to start cutting. • For details on unloading the mat after cutting, follow the procedure under “Unloading the Mat” on page 27.
b Ignore Object Size Key Small unnecessary patterns (dotted lines, etc.) can be excluded from cutting data. For details, see “Specifying “Ignore Object Size”” on page 81. c Smoothing Setting Key Specify the level of smoothing applied to the image outline. For details, see “Adjusting Image Detection Levels” on page 81. d OK Key Touch the “OK” key to apply the settings. When trimming is performed, the “OK” key changes to the “Preview” key. After trimming, touch the “Preview” key to check the trimming results. Memo • When making a stamp, for example, the image may not be converted to cutting data if it contains a gradation or areas that are only partially filled with a color.
4
Advanced Cutting Functions for “Direct Cut”
■ Outline Distance Use this function to cut while adding a margin around patterns. Specify the distance from the cutting line to the outline of the scanned image.
c Touch the “OK” key.
c
a
b
• Touch to edit the imported cutting data. For details, see “Advanced Cutting Functions for “Direct Cut”” on page 73. or • Touch the “Edit” key to fill patterns or make outlines thicker. For details, see “Using Drawing Functions to Fill Patterns/Make Outlines Thicker” on page 67. In addition, a pattern can be deleted, or multiple patterns can be selected. For details on selecting multiple patterns, see “Selecting Multiple Patterns” on page 38. Only the cutting lines appear.
a Pattern outline b Cutting line c Outline distance
Available in the following screen
Tutorial 3; Step c (page 72) in “Grayscale recognition mode” or Step c (page 73) in “Color recognition mode”
Image trim screen
73
Made with FlippingBook - professional solution for displaying marketing and sales documents online