d Attach the original to the mat, and then load the mat into the feed slot. • Lightly insert the mat into the feed slot, and press in the operation panel. • For details on loading the mat, see “Loading the Mat” on page 26. Memo • Depending on the machine model, the sizes of e Touch the "Start" key to start scanning. • When the scanner lever is raised, a confirmation message appears. For details, see step g in “Scanning” of “Tutorial 3 - Scanning and Cutting” on page 69. When scanning is finished, the scanned image appears in the screen. mats that can be used will differ. Check the “Maximum Scanning Area” under “Machine Information” of the settings screen.
b Color recognition mode The cutting data is created without converting the illustration to grayscale. Creating data in this mode may take some time. * The default color recognition setting is the grayscale recognition mode.
Examples of illustrations appropriate for recognition mode:
Recommended recognition mode
Example
Outlines that are clear
Grayscale recognition mode
• Distinct
difference in brightness between background and illustration
• Different
brightness of adjacent colors
• Similar
brightness of adjacent colors
Color recognition mode
Memo • The edges of adjacent colors with the same brightness, as shown below, cannot be detected. In this case, use the color recognition mode.
a
a c
b d
a “a” and “b” as well as “c” and “d” have the same brightness.
c Scanning area The scanning size settings screen appears. The size of the scanning area can be selected. The available scanning area sizes differ depending on the model.
76
Made with FlippingBook - professional solution for displaying marketing and sales documents online