b Use the touch pen (stylus) to touch and drag it around the screen to trim the cutting lines. • When trimming is performed, the “OK” key changes to the “Preview” key. Touch the “Preview” key to confirm the trimmed area.
c Select the detection standard in the image editing screen. The image shape is detected and cutting lines are created based on one of two standards. For this example, touch to create cutting lines using region detection. For details on the detection standards, see step a in “Grayscale recognition mode”.
b a
a
b
c
c
d
a Image Detection Level Key Adjust the image detection level. b Ignore Object Size Key
e f
Small unnecessary patterns (dotted lines, etc.) can be excluded from cutting data. For details, see “Specifying “Ignore Object Size”” on page 81. c Smoothing Setting Key Specify the level of smoothing applied to the image outline. For details, see “Adjusting Image Detection Levels” on page 81. Color recognition mode a In the image trim screen, use the touch pen to drag to trim the image to the size to be imported.
a Outline Detection Key b Region Detection Key
Difference in cutting lines depending on detection standard a Outline detection b Region detection
Memo • Trimming the image to the desired size can reduce the amount of time required to convert it to cutting data. b Touch the “OK” key to confirm the trimmed area.
c Image Detection Level Key If the cutting lines were not correctly detected, change the number of colors to be detected. If a color that appears as a single color is detected as separate colors, reduce the number of colors. If adjacent colors with a similar brightness are detected as a single color, increase the number of colors.
78
Made with FlippingBook - professional solution for displaying marketing and sales documents online