d Touch the “OK” key to exit “Scan to USB” mode.
Memo • Load the mat with the original to be scanned attached, and then touch to display the mat in the screen. The scanning area can be selected while viewing the displayed image.
e Press
in the operation panel to feed out
the mat. f Remove the USB flash drive from the USB port (for a USB flash drive) on this machine. g From a computer, check the saved image data.
• On models compatible with 24-inch scanning, the mat size key ( ) appears. (Touch a ) to specify a mat size of 12" × 12” (305 mm ×305 mm) or 12" × 24” (305 mm × 610 mm).) mat size key ( or d Continue from step g in “Scan Settings” of “Tutorial 5 - Scanning to USB”.
4
Selecting the Area to be Saved
When saving a scanned image to a USB flash drive, the desired scanning area can be specified. a Follow steps a through e in “Scan Settings” of “Tutorial 5 - Scanning to USB” on page 83. b Select “Custom”, and then touch the “OK” key. c Using the touch pen (stylus), drag to select the scanning area, and then touch the “OK” key.
Transferring an Image to CanvasWorkspace
An image scanned with the machine can be sent to CanvasWorkspace. This is useful for saving data or editing the image in CanvasWorkspace. a Select “Transfer to CanvasWorkspace” in the scanning mode selection screen.
• The scanning area (white area) can also be dragged to move it.
b Touch
to display the scanning settings
screen.
85
Made with FlippingBook - professional solution for displaying marketing and sales documents online