Chapter 1 GETTING STARTED
PARTS AND FUNCTIONS
d Scanner Lever Adjusted according to the operation being performed. For details, see “Preparing for Feeding the Mat” on page 9. e Grips Grasped when moving the machine. f Feed Rollers Should be adjusted on the right side when the optional roll feeder is used. For details, see “Adjusting the Position of the Feed Roller” on page 94. g Shaft Drives a feed roller on each end to feed the mat. h Feeder Release Lever Locks or releases the shaft when the optional roll feeder is used. For normal operations, set to the locked position. For details, see “Adjusting the Position of the Feed Roller” on page 94. i Tool Holder Holds accessories upright for easy access during use. j Storage Stores accessories. k Front Tray Cover Protects the feed rollers, carriage and holder. Open the cover while the machine is operating. l Feed Slot Feeds in the mat when it is loaded.
Unit Descriptions - Front
f
a
b
h
i
c
e
d
e
j
f
g
k
l
a Operation Panel Allows you to control the unit and specify settings with the LCD panel and operating buttons. The angle of the operation panel can be adjusted. b Tool Tray Stores accessories for easy access during use. c Carriage Moves the installed holder for cutting or drawing.
a
b
c
1 Holder Installs in the carriage to cut or draw on craft paper or fabric. Use the holder designed specifically for cutting or drawing. 2 Holder Guide The guide secures the holder. 3 Holder Lock Lever Releases the holder when the lever is raised. Locks the holder when the lever is lowered.
6
Made with FlippingBook - professional solution for displaying marketing and sales documents online