c Pull up the holder to leave the blade in the rubber area.
b Twist on the holder cap to attach it to the holder. Fully tighten the cap until it can no longer be turned.
■ Installing a Grasp the shaft of the new blade, and then insert it into the blade slot in the end of the holder. The blade shaft is held in place by a magnet in the holder. Slowly insert the blade shaft, and then slowly release it after the shaft snaps into place against the magnet.
WARNING • This is not a toy and is not intended to be used by children. In order to prevent choking hazards, do not allow infants/children to put the protective cap in their mouths. CAUTION • After removing the blade holder from the machine, be sure to attach the protective cap. • Do not press the tip of the holder with your hand or fingers because the tip of the blade will extend and may result in injuries. • Please remove protective cap from blade holder before placing it into the machine carriage. • This is not a toy and is not intended to be used by children. In order to prevent injury, do not allow infants/children to touch the blade.
88
Made with FlippingBook - professional solution for displaying marketing and sales documents online