Adjusting the Screen
Adjusting the Scanning/Cutting Position
If the screen does not respond correctly when you touch a key (the machine does not perform the operation or performs a different operation), follow the steps below to make the proper adjustments. a Holding your finger on the LCD screen, turn the main power to off and back to on. Keep your finger on the LCD screen, until Brother logo disappears.
In “Direct Cut” mode, the cutting position can be automatically adjusted if it has shifted. For details on the “Direct Cut” mode, see “SCANNING FOR CUTTING (Direct Cut)” on page 69.
■ Materials
Thick paper Color: White Size: A4 size (210 mm × 297 mm) or Letter size (216 mm × 279 mm) Thickness: 0.2 to 0.3 mm (recommended) Mat suitable for the material (See page 14.)
Paper
Mat
Cutting blade
Auto Blade Holder (black)
The touch panel adjustment screen is displayed. b Using the included touch pen (stylus), lightly touch the center of each +, in order from 1 to 5. If an error occur when touching +, start again from number 1.
Memo • Be sure to first test attach it to a mat suitable for the paper. a Insert the holder into the carriage. • For details, follow the procedures under “Installing and Uninstalling the Holder” on page 24. b Attach the paper to the mat. • Align the upper-left corner of the paper with the upper-left corner of the mat. • For details on attaching the paper, follow the procedure under “Attaching the Material (Paper)” on page 16.
After completing the touch panel adjustment, the message “SUCCESS” appears on the screen. c Turn the main power to off, then turn it back to on.
b
Note
a
• If you finish the screen adjustment and the screen still does not respond correctly, or if you cannot do the adjustment, contact the retailer who sold you this machine or the nearest authorized service center.
a Long side b Short side
92
Made with FlippingBook - professional solution for displaying marketing and sales documents online