870-INSPIRE GRP High-end dust and waterproof luminaires with LED modules. Synergy of art and technology Inspiring design in professional quality. YOUR MAIN BENEFITS: Gear tray integrated into the diffuser Cost efficient and user-friendly installation even without disassembling the luminaire
Mounting Instruction Video
FIELD OF APPLICATION: Thanks to the construction principles of gasket, closing system and diffuser our LED fixtures ensure a high grade of protection (IP66, on request IP67) against dust, contamination and water permeation. In accordance with their IP rating they can be widely used to illuminate spaces with dusty and humid environments. When using outdoors, the fittings should be protected against direct sunlight and adverse weather conditions. Under 0°C the application of venting plug or venting cable gland is necessary, as well as the silicone gasket is recommended. TECHNICAL DESCRIPTION AND BENEFITS: n Housing: It is made of flame retardant GRP - glass fibre reinforced polyester (on request suitable for 850°C glow wire test too), in light grey (RAL7035) colour. Glass fibre reinforced polyester has very good temperature resistance and mechanical stability. Furthermore it is a good electrical insulator resisting the impacts of several chemicals and weather conditions. Its stability of size and shape at changing temperatures is excellent. n Diffuser: Available in PC - injection moulded opalised Polycarbonate (high mechanical strength and high heat and shock resistance) or in Acrylic - injection moulded opalised PMMA (unique non-aging properties, high chemical resistance). Further benefits: - Extremely high light transmissivity (up to 90%) - Homogenous, well-balanced light dispersing (no shadows) - Keeping the usual, well known features of the diffuser such as chemical and heat resistance, mechanical features, UV stabilization etc. - Universal width (no single and twin) simplifies the light calculation. n The gasket between the diffuser and the housing is available in two versions: - Injected silicone-based endless foam - Non-aging PU (polyurethane) endless foam n Fixing the diffuser to the body: With stainless steel clips. n Gear tray (reflector): The gear tray is integrated into the diffuser thus enabling a cost efficient and user- friendly installation even without disassembling the luminaire. White powder coated steel sheet, the LED module mounting positions according to Zhaga standards or customized.
n Electrical components: The adequate power supply is ensured through electronic driver.
Made with FlippingBook - Share PDF online